Cisco Systems

  1. Home
  2. Cisco Systems
14701 Threads Posts
to

Worth reading in Cisco Systems

DHCP through IPsec

Ok all, this is my scenario. I have DHCP serving all of my internal users with no problem at all, on different networks...
1 comments posted 19yrs
posted by j
1 comments posted 19yrs posted by j

CatOS 6.4 came after 8.5 - what happened to 8.5

We just got a couple of new 6509's, and they shipped with catos 6.4.23. This didn't make sense to me since 8 has been s...
1 comments posted 19yrs
posted by john
1 comments posted 19yrs posted by john

Forwarding Ports through a Cisco ASA 5505

Hi There, If someone could help me that would be great. I have a Cisco ASA 5505 that I'm trying to configure to allow a...
3 comments posted 19yrs
posted by logicalrich
3 comments posted 19yrs posted by logicalrich

trace route

i would like to see the name of the network device during a trace. is all that is necessary, is to configure; ip domain...
5 comments posted 19yrs
posted by lgovedich
5 comments posted 19yrs posted by lgovedich

48Mb image for 837

Is still there an image for my 837 router that "fits" into the 48 Mbytes it is provided with? It must be used in produc...
2 comments posted 19yrs
posted by am
2 comments posted 19yrs posted by am

AP local Auhenticator

Hi guys, I have a 1200 Aironet that i need to configure as a local authenticator, (using local RADIUS authentication) i...
2 comments posted 19yrs
posted by dandashi
2 comments posted 19yrs posted by dandashi

view open ports

Hi, How can I view listening & open ports on a cisco router (without using a scanner on a workstation of course!)? i am...
6 comments posted 19yrs
posted by s_mortazave
6 comments posted 19yrs posted by s_mortazave

Cisco 2811 Syslog configuration problem

Hello, I am trying to pass syslog from outside interface to server that sits behind pix firewall. Details as follows. C...
2 comments posted 19yrs
posted by listserve2006
2 comments posted 19yrs posted by listserve2006

Why this ACL wan't be compiled?

On my 2811 ISR (IOS 12.3(11)T10 adv. ip svc.) I have implemented the following ACL bounded to fa0/0 inbound direction:...
0 comments posted 19yrs
posted by pseto
0 comments posted 19yrs posted by pseto

Books FAQ

I was looking for suggestions for Books on IOS so I Googled for "Cisco FAQ" as I thought "what books" would be a FAQ. N...
6 comments posted 19yrs
posted by scobloke2
6 comments posted 19yrs posted by scobloke2

3560 switch / router

Hi, Before I enable the routing of the 3560, I use ip default-gateway to point the traffic to an external router. I am...
1 comments posted 19yrs
posted by a
1 comments posted 19yrs posted by a

vlan configuration

Hi, For the following configurations, is there any difference besides the configuration 1 needs trunking for the switch...
0 comments posted 19yrs
posted by a
0 comments posted 19yrs posted by a

ip nat inside question

if appropriate inside ip and PORT number is entered in the form below ip nat inside source static tcp 10.10.10.3 3389 i...
3 comments posted 19yrs
posted by no.no.no
3 comments posted 19yrs posted by no.no.no

Difference between Pure VOIP and Hybrid

Can someone tell me the difference between a Pure VOIP solution a la CISCO vs an Hybrid - Avaya. I am told that there i...
2 comments posted 19yrs
posted by dabuld
2 comments posted 19yrs posted by dabuld

Pix Point to Point VPN

I'm at a loss. I've tried to get this Point to Point VPN setup from our home office to our colo'd server and I can't se...
1 comments posted 19yrs
posted by marcosbarrera
1 comments posted 19yrs posted by marcosbarrera