Cisco Systems

  1. Home
  2. Cisco Systems
14701 Threads Posts
to

NAT ~ when two computers with same IP talk?

What happens when I'm at home behind my router at 192.168.0.1 and I talk to my friend who's at home behind his router a...
2 comments posted 18yrs
posted by dennispublic
2 comments posted 18yrs posted by dennispublic

interconnect console port

Hi, In equipment requirements for lab I've found "A/B/C/D switch to connect PC to the router's console port". What hard...
1 comments posted 18yrs
posted by orfe
1 comments posted 18yrs posted by orfe

Subnetting Within Single VLAN

Hello.. I have an ASA and sub-interfaces setup for multiple VLANS on a single interface. One of the ranges is 10.1.79.0...
1 comments posted 18yrs
posted by geekfromny
1 comments posted 18yrs posted by geekfromny

Reverse telnet.

Hi folks, the topic maybe has been discussed over and over but since I can not get my 877 accessing to a 837 through re...
5 comments posted 18yrs
posted by no_e-mail_address
5 comments posted 18yrs posted by no_e-mail_address

Multiple subinterfaces per port on a 3745

Hello Experts, I am trying to replace a linux router with a cisco 3745 router (IOS 12.4) in a testbed. In my current li...
2 comments posted 18yrs
posted by stuff2save
2 comments posted 18yrs posted by stuff2save

3640 latest 124-16 wont fit in flash

im trying to load the latest 3640 ios (c3640-jk9o3s-mz-124-16.bin), however with max 32mb flash i cant load it. it says...
8 comments posted 18yrs
posted by geekylinuxkid
8 comments posted 18yrs posted by geekylinuxkid

Question about PIX 515E setup

I am new at setting up the PIX and have a real basic question that I hope someone will be kind enough to help with. I h...
3 comments posted 18yrs
posted by Jim
3 comments posted 18yrs posted by Jim

voip rtp nat problem

Hi all, I have a Cisco 857W as router (with 1 fixed public address). NAT is in use and behind it there are some servers...
0 comments posted 18yrs
posted by anonymous
0 comments posted 18yrs posted by anonymous

MRTG for a PIX

Could someone share a working MRTG configuration for graphing the traffic over the outside interface of a PIX 501? cfgm...
3 comments posted 18yrs
posted by ts-usenet0708
3 comments posted 18yrs posted by ts-usenet0708

load balancing adsl and sdsl

Hi all, I have just been asked to setup load balancing over one sdsl circuit and one adsl circuit on a 1721 router. Is t...
3 comments posted 18yrs
posted by handley88
3 comments posted 18yrs posted by handley88