Hi,
We have a site to site IPSEC tunnel between two offices both running on PIX 515e's version 6.3(4) and in our main site the PIX is configured for PPTP VPN clients to connect. All well and good. I would like clients connecting on the VPN to be able to route to the internal network in our second site across the IPSEC tunnel as well.
Does anyone have some generic first steps or tips on how to do this or whether it's even worth attempting?
Thanks for your input.
Ashley
You simply can't with 6.3(4) but you could upgrade to 7.x if possible and then you should be able to. I have never tried that though.
I'm 100% sure you can if you upgrade to ASA or router.
-Aki
snipped-for-privacy@gmail.com wrote:
Close, but not -exactly- right. You -can- do it with PIX 6, but in order for it to work, the interface that the PPTP VPN clients connect to must be different than the interface used to connect to the remote office. If you only have one interface connected to the outside world, then you have a problem -- unless you can split your IP address space at your WAN router so that different addresses go to different perimeter interfaces (or to different VLANs on the same outside interface.)
Have something to add? Share your thoughts — no account required.
Ask the community — no account required