60 discussions on Cabling-Design.com Forums about the Cisco 506E: what owners asked, what went wrong, and what fixed it.
=46rom home, we use plain old home Netgear routers to connect up to thenet. We use our laptops and the Cisco VPN client to connect up to aCisco VPN Appliance in a data center and MS=92s RDP to connect up to ourservers. This setup works...
Hello,I have this strange problem and i can't seem to understand it. I have the following situation, i have been posting here before under the same name and subject. So you can read back. Though probably that is not needed.Internet (Zyxel...
Hello!I've just switched from a normal router (with port forwarding) to the Cisco PIX 506E. Everything is configured and working, except sending emails with IMAP. I'm able to receive Emails via IMAP but if I want to send an email to an...
Hi allI have to setup 8 VPN (IPSec) connections from branch offices via ADSL(where usually works 2 or 3 people with WIN XP clients) to headquarterswhith two servers (SBS2003 and w2003 server).I was thinking about this:Headquarter: ...
I need to replace the firewall on a small network (~15 users) and I'venarrowed the choices down to two: the PIX 506E and the Netscreen 5GT.Which is the better choice for this application? I noticed that the 5GThas an extended mode varient...
Help..I've been reading thru these groups, google-ing and reading anything Ican.I cannot get RDP to work theu a PIXCan someone help?please send strings.. xxx.xxx.xxx.xxx = Outside IP yyy.yyy.yyy.yyy- Inside IP