Wake on Lan, Pix 506E

I have a Pix 506E firewall on my network at work. I am trying to use the Depicus utility to wake up my work computer from home. The utility works from inside the network, but I don't know how to use from outside the network.

Can anybody help me accomplish this?

Reply to
phitchcock
Loading thread data ...

How about logging onto a terminal server etc, and running the app from there?

Regards

snipped-for-privacy@comcast.net wrote:

Reply to
James

formatting link
Configure a VPN, at that point you can access all resources on the internal network, however you do not mention the version of OS your PIX is running, also you may ask the vender on what ports need to be published through the firewall in order to make *their* utility work...

From their website :

formatting link

Reply to
Chad Mahoney

Reply to
phitchcock

I run our network here but It's not my specialty...

How do I find the version of the OS on the PIX?

The utility will let me designate a port, so it should work as long as I enter a port that the PC is listening on, correct?

Chad Mah> > I have a Pix 506E firewall on my network at work. I am trying to use

formatting link

Reply to
phitchcock

show version

Reply to
Walter Roberson

This what I got from 'show version'

Cisco Pix Firewall Version 6.3(1) Cisco Pix Device Manager 3.0(1)

Reply to
phitchcock

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.