60 discussions on Cabling-Design.com Forums about the Buffalo WHR-HP-G54: what owners asked, what went wrong, and what fixed it.
Greetings,Out of the box, I set up the WRT120N router per instructions from themanual.Problems:1. I need to power-cyle the router every 24 hours for the devices toidentify the hotspot, if I don't, the wired router function is fine,but...
I have a MIMO 802.11g router, and USB wireless adaptor.range is insufficient.I measured signal to noise ratio in netstumbler on the comp with theusb thing. It went from -85dbi to -95dbi and disconnected (dunno ifwas db or dbm or dbi ). But...
Hey,Last year I bought an RV and my wife an I have been travling across thenation since. We have a laptop and found that we had trouble picking upthe wireless networks offered by the RV parks because of low signalstrength. I looked for...
I have a new Toshiba L35-S2171 laptop running XP Home. The built-in wireless shows up in Device Manager as an Atheros AR5005G. the driver version is 4.1.2.146. The router is a new Buffalo WHR-HP-G54, with firmware 1.40, using WPA TKIP...
Bought one of these because I have a customer that has a long skinny building that he wants to add wifi to and I was hoping the better receiver and higher transmit power would offer him a little better coverage and from what I can tell it...
Since WRT54G firmware upgrade from 2.2 (I think) to V4.21.1 I no longer haveaccess to my laptop files no matter what I try. Internet access is OK,signal is very good, all firewalls have been turned off etc .. The OS is XPProfessional on...