Cisco Systems

  1. Home
  2. Cisco Systems
14705 Threads Posts
to

Worth reading in Cisco Systems

serial interface config

hi i use DB-60 back to back cable to connect to 2 2501 router . and find the round trip(about 60 ms) is quite high when...
1 comments posted 20yrs
posted by b.mwlam
1 comments posted 20yrs posted by b.mwlam

Problems with MTR (traceroute) through a PIX

So I've noticed the following interesting problem when trying to traceroute through a PIX 515E (7.0). I received the IC...
1 comments posted 20yrs
posted by jlamanna
1 comments posted 20yrs posted by jlamanna

cisco 2610 config problem

hi all, i got a problem after i config the 2610 and then 'wr mem' or even i try 'copy run start' to save teh config. bu...
3 comments posted 20yrs
posted by b.mwlam
3 comments posted 20yrs posted by b.mwlam

Newbie: 2621xm setup problems

Hi folks, I'm new to Cisco routers, so here is my problem and hopefully one of you guys will be able to help. I'll try...
1 comments posted 20yrs
posted by dannysmithuk
1 comments posted 20yrs posted by dannysmithuk

SIP-ISDN Gateway in 1760 ?

Hi, i want to setup a gateway between my SIP account and a VIC- NT/TE on a 1760. Has anybody a working config or can hel...
1 comments posted 20yrs
posted by chris1979
1 comments posted 20yrs posted by chris1979

Cisco 837 between remote sites

Hi , The secanrio is there are three remote office connected to internet all of them use cisco 837 router and 2 offices...
1 comments posted 20yrs
posted by madhavan.madhu
1 comments posted 20yrs posted by madhavan.madhu

Problem under FC4 with Cisco VPN Client

Necessary kernel and kernel-devel packages installed. # uname -a Linux fedora 2.6.15-1.1831_FC4 xxxx i686 athlon i386 G...
1 comments posted 20yrs
posted by scmoseman
1 comments posted 20yrs posted by scmoseman

Newbie help needed with 3600

I have a new client to set up. They have some equipment from an office that went out of business that I need to configu...
8 comments posted 20yrs
posted by
8 comments posted 20yrs posted by

Can't map network drive via VPN connection.

I can connect to VPN using client 4.7.00.0533 fine. I can remote desktop and ping machines but I can't map a network dr...
3 comments posted 20yrs
posted by teejayem
3 comments posted 20yrs posted by teejayem

Access-list Question and ports

All, I want to allow full communications and all ports (23, 21, 5000, etc) to be opend between 2 vlans. 1st vlan 112 ac...
1 comments posted 20yrs
posted by rich_grant35
1 comments posted 20yrs posted by rich_grant35

Cat2924 - normal CPU % usage?

Hey, I have a WS-C2924-XL which is running an aggregate constant 5000ppm and roughly aggregate 20-30mbps through about...
1 comments posted 20yrs
posted by paperboy
1 comments posted 20yrs posted by paperboy

Cisco 760 & port 80

I am still trying to get this router to work properly (see also post of februari 10) and think the problem may lay in t...
1 comments posted 20yrs
posted by cesco
1 comments posted 20yrs posted by cesco

SDM Java stack overflow

I have a 1811 router and 2 computers running windows 2000 pro. One computer talks to SDM fine, however, the other compu...
1 comments posted 20yrs
posted by sweenea
1 comments posted 20yrs posted by sweenea