Cisco Systems

  1. Home
  2. Cisco Systems
14705 Threads Posts
to

Worth reading in Cisco Systems

linksys wap54gp ap

I was looking at the doc's for the Linksys WAP54GP AP. It can have up to 7 wireless vlans but it must be connected to a...
3 comments posted 20yrs
posted by njkat
3 comments posted 20yrs posted by njkat

T1 line bandwidth qustion Upstream downstream

Does a full point to point T1 line transfer at 1.5 MBPS full duplex transmit and receive simultaneosly? So in other wor...
1 comments posted 20yrs
posted by mdargin
1 comments posted 20yrs posted by mdargin

VPN Client can't access Remote Intranet

Hi there, I have Cisco PIX set up that connects us to the Internet. We want to use Cisco VPN client ver 4.6.02.0011 to...
3 comments posted 20yrs
posted by vkevau
3 comments posted 20yrs posted by vkevau

is CDP really layer 2 ?

My routers are connected each other through Hub with FastEthernet cables. When I looked into cdp packet captured by Eth...
5 comments posted 20yrs
posted by jh3ang
5 comments posted 20yrs posted by jh3ang

OID for Call Manager item??

In CCM real time monitoring, there is a display for "ActiveGatewayPorts&Channels". Can anyone tell me the SNMP OID for...
4 comments posted 20yrs
posted by jervin
4 comments posted 20yrs posted by jervin

Regarding UDP Broadcasts and Multicasts

Hi folks, I have enabled Ip directed broadcast on one of our Routers, with appropriate helper address. If I enable "ip...
4 comments posted 20yrs
posted by su.ranganath
4 comments posted 20yrs posted by su.ranganath

Cisco IOS Routing Syntax

Currently, I have a route set up like this on my 2600 running IOS 12.1: ip route 69.242.89.0 255.255.255.0 69.242.89.25...
5 comments posted 20yrs
posted by psx
5 comments posted 20yrs posted by psx

PIX issue

Hello - can anyone spot the problem with my PIX config? I have a PC on the inside interface and I can PING it OK from t...
0 comments posted 20yrs
posted by nedtrilby
0 comments posted 20yrs posted by nedtrilby

AS-Path Manipulation

Hi, We are an ISP that has two transit feeds to Level3. We wanted to "load-balance" ingress traffic on each 1GB link. W...
6 comments posted 20yrs
posted by ryanfinnerty
6 comments posted 20yrs posted by ryanfinnerty

VPN logging

I'm using cisco 2811 router as a vpn server. Mobile clients connect to it with cisco vpn client. Is there any way i can...
2 comments posted 20yrs
posted by ugarb2001
2 comments posted 20yrs posted by ugarb2001

What is better for traffic shaping?

Hi guys, we are creating a data center and we want to shape tha bandwidth to each of our rack. What kind of shaping wou...
4 comments posted 20yrs
posted by askarius
4 comments posted 20yrs posted by askarius

Cisco 837 Router

I have a Cisco 837 Router that is second hand and for the last 2 weeks I've been beating myself to death trying to comp...
21 comments posted 20yrs
posted by mcglynn.joe
21 comments posted 20yrs posted by mcglynn.joe

Associate with 871W, no IP address

I am working with a Cisco 871W. No fewer than three computers associate to it, gain an IP address from it, and connect...
15 comments posted 20yrs
posted by tomfeldsten
15 comments posted 20yrs posted by tomfeldsten

3560 Config

OK, I'm so new to this that I can't even spell Cisco, but I'm in desperate need of some help. I need to get three 3560'...
4 comments posted 20yrs
posted by we_coyote
4 comments posted 20yrs posted by we_coyote