Cisco Systems

Cannot discover devices with Cisco Works LMS

I used to use CiscoWorks 2000 a long time ago. Anyway, I'm trying out the 90-day trial version of CiscoWorks LMS runnin...

2 comments posted 18yrs

posted by ttripp

2 comments posted 18yrs posted by ttripp

Cisco PIX 515E multiple VPN question

Hi, We have two remote sites, that due to their location and cost constraints, we cannot include in our MPLS model. Bot...

1 comments posted 18yrs

posted by martin.stenner

1 comments posted 18yrs posted by martin.stenner

3750 and OSPF - Which IOS do I need

Hi I have a 3750 which doesn't support OSPF, here is the output of the sh ver command Can anyone tell me which IOS vers...

7 comments posted 18yrs

posted by scootyjthompson

7 comments posted 18yrs posted by scootyjthompson

HP ProCurve and Cisco Catalyst

Hello mankind, I cannot find a document or website related to my problem: linking a "HP Procurve 2510-24" to a "Cisco C...

2 comments posted 18yrs

posted by diebugger

2 comments posted 18yrs posted by diebugger

Site-to-Site VPN routing?

Cisco ASA 8, ASDM 6. I set up a IPSEC shared secret VPN with a customer. The tunnel comes up fine, but I do not believe...

2 comments posted 18yrs

posted by spamtrap

2 comments posted 18yrs posted by spamtrap

How to configure Call back on Aux Port with modem and Radius

I want to setup callback on our cisco 2620. It used to work prior to implementing radius authentication. If I remove th...

1 comments posted 18yrs

posted by sdj30

1 comments posted 18yrs posted by sdj30

1841 with 3 internet connections (2xADSL, 1xbridged) help

Hello, I have inherited a Cisco 1841 which is running the office here. I should state that I am not a Cisco guy, so i'm...

14 comments posted 18yrs

posted by j.l.robinson

14 comments posted 18yrs posted by j.l.robinson

ASDM : connection interrupted

Good morning everybody, After successfully configuring NAT on a cisco ASA5510, I have a problem with the ASDM access. I...

0 comments posted 18yrs

posted by andrerodier

0 comments posted 18yrs posted by andrerodier

Let two objects point to the same destination/address

hi, on a ASA 5520 I want to create a forwarding rule: there exists already a rule from outside 1.2.3.4 on the server 19...

2 comments posted 18yrs

posted by lars

2 comments posted 18yrs posted by lars

2600 cisco

Hi guys after loading a new IOS onto my 2610xm this is the message I got. the ios before did not work properly i guess...

3 comments posted 18yrs

posted by SamPasic

3 comments posted 18yrs posted by SamPasic

2611 loading issue

System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1) Copyright (c) 1999 by cisco Systems, Inc. TAC:Home:SW:IOS:...

2 comments posted 18yrs

posted by SamPasic

2 comments posted 18yrs posted by SamPasic

3620 memory requirements exceed available memory

HI GUYS I loaded a new IOS but i loaded the wrong one by accident and now its exceeding memory. How do i erase it and l...

4 comments posted 18yrs

posted by SamPasic

4 comments posted 18yrs posted by SamPasic

PIX and Windoes CA Server, 7.x work with Enterprise CA?

Years and years ago, I managed to get my Pix to talk to my Windows 2000 Standalone CA Certificate Server with the help...

3 comments posted 18yrs

posted by scott-i

3 comments posted 18yrs posted by scott-i

3620 need quick instructions

Hi guys Im trying to load an IOS on a 3620 and im wondering what do i type for interface im in config and i try to type...

4 comments posted 18yrs

posted by SamPasic

4 comments posted 18yrs posted by SamPasic

dual honed ebgp multihop

I have a question concerning bgp multihop. I have a dual homed( Both peers reside with the same isp) bgp v4 configurati...

1 comments posted 18yrs

posted by mmark751969

1 comments posted 18yrs posted by mmark751969