I have a SunRocket AC-211-SR VOIP Gateway. It's label show's that it works at either 10 or 100mb. Anyone know a way to force the unit to run at 10mb? I'd like to use VOIP GW to a router port that only works correctly at 10mb.
Surely the link should auto-negotiate to the fastest speed *both* ends support..? I have a printer server that only works at 10Mbit, when I plug it into my 100Mbit switch the LED that indicates 100Mbit doesn't come on, indicating that port is running at 10Mbit.
It if worked I wouldn't be trying to figure out how to do the workaround. The problem is auto-negotiate. I need it off so I can force it to a speed where the port works rather then the 100MB that it's thinks it's working at
Surely the link should auto-negotiate to the fastest speed *both* ends support..? I have a printer server that only works at 10Mbit, when I plug it into my 100Mbit switch the LED that indicates 100Mbit doesn't come on, indicating that port is running at 10Mbit.
Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here.
All logos and trade names are the property of their respective owners.