23 discussions on Cabling-Design.com Forums about the Caddx NX-8E: what owners asked, what went wrong, and what fixed it.
Hello All,Additional input. I was at the customers home yesterday and found the following.The wiring for line seizure was completed properly.The voltage for ON Hook was at 46.28 vdcThe voltage for OFF Hook was at 11.89 vdcThe RING voltage...
Does anyone know what the latest montly service costs are for theTelular Telguard TG-1 & TG-4? I've heard the TG-4 is a bit more thanthe TG-1. I was curious what the starting monthly service price wasbefore I purchased either one.If someone...
Long time customer moved into house containing Napco 8-zone Panel,two GEM-RP1CAe2 Keypads, and all windows and doors contacted, severalCO's, System Sensor SD's, motion detectors, and six or eight zonemodules positioned adjacent to the...
I just recentely purchased a NX-8E and would like it to communicate viathe RS232 port to a home automation system. For example, when someoneopens a sensored door, have the NX-8E send a ASCII command to mylighting system to automatically...
Dave Houston's roZetta is nearing availability.I will be distributing these for Dave. Bare printed circuit boards andpartial kits will be available. The two expensive components (ZX-40microcontroller and the EM202 Ethernet module) will...
This is old stuff from before the buyout, but the customer wants smart phone remote access for status and arm/disarm. I am not even sure where to start. My first thought is to swap to a Napco panel and use iBridge, but that's an awfully...