Cisco Systems

  1. Home
  2. Cisco Systems
14705 Threads Posts
to

Worth reading in Cisco Systems

ADSL PPPOA mode.

Hi, maybe there are different way of doing the same things with IOS 12.3. In particular I wondered about PPPOA mode for...
0 comments posted 21yrs
posted by am
0 comments posted 21yrs posted by am

ospf

hi Is ospf authentication interface specific or does it have to be enabled throughout the ospf area. thanks
2 comments posted 21yrs
posted by athaided
2 comments posted 21yrs posted by athaided

clear line vty on Cisco 7200

in the first place, I ask excuses you because my English is not very good. I hope that you understand what I mean to yo...
4 comments posted 21yrs
posted by elr1981
4 comments posted 21yrs posted by elr1981

3640 router, BGP-4, and 2x ISPs

Hello, First, I would like to say I my knowledge of BGP can fit on the edge of an atom. The other protocols, no problem...
2 comments posted 21yrs
posted by darktiger
2 comments posted 21yrs posted by darktiger

Checkpoint NG and Protected ports

I know that on a 2950 protected ports cannot talk to each other on layer 2. That is fine. My question is, does anyone h...
0 comments posted 21yrs
posted by tcollicutt
0 comments posted 21yrs posted by tcollicutt

CISCO IDS/IPS --> Log in SDEE Format

Hi, refered to the article http://www.trusecure.com/company/press/pr_20040223.shtmlCISCO offers log messages (especiall...
1 comments posted 21yrs
posted by tmedvkkhts
1 comments posted 21yrs posted by tmedvkkhts

PPTP through PIX v7 PAT

I just upgraded from 6.3(3) and can't get pptp out through PAT. I have tried fixup protocol pptp 1723 (it gets converte...
0 comments posted 21yrs
posted by igor.videc
0 comments posted 21yrs posted by igor.videc

Simple question

Hi, This may be a simple question, but I can't find it in my documentation! How do I remove or delete a static route fro...
2 comments posted 21yrs
posted by SW
2 comments posted 21yrs posted by SW

OSPF authentication

What is the best was to implement ospf authentication MD5 in ospf areas? I know one has to put the ip ospf message dige...
0 comments posted 21yrs
posted by athaided
0 comments posted 21yrs posted by athaided

PIX: can't seem to get secure shell working

can't seem to get secure shell working ; have a PIX and Putty. ssh 0.0.0.0 0.0.0.0 outside ssh timeout 20 I have Putty...
2 comments posted 21yrs
posted by arthur
2 comments posted 21yrs posted by arthur

VRF Lite installation

Afternoon, I'll soon be implementing VRF lite. The proposed design has multiple instances of VRF and each one will be u...
0 comments posted 21yrs
posted by dopy
0 comments posted 21yrs posted by dopy

pix static syntax change ?

static (dmz,outside) 40.1.1.4 40.1.1.4 netmask 255.255.255.255 This takes me by surprise, as it's not in keeping with t...
3 comments posted 21yrs
posted by arthur
3 comments posted 21yrs posted by arthur