Cisco Systems

  1. Home
  2. Cisco Systems
14705 Threads Posts
to

Worth reading in Cisco Systems

Port Spanning

We have 3 servers connected to dofferent siwtch and need to start monitoring for intrusion detection. We need to pass a...
1 comments posted 21yrs
posted by reachus
1 comments posted 21yrs posted by reachus

Remote Office Connectivity

We have 2 offices. Head office and a satelite office. Each site has a router and an internal PIX firewall. The satelite...
5 comments posted 21yrs
posted by reachus
5 comments posted 21yrs posted by reachus

port fast ? cisco 3500 xl

when I configure switch accross http - "Cisco Cluster Managment Suite" I can set port - "Fast - enable" Port->port sett...
1 comments posted 21yrs
posted by stachu3d
1 comments posted 21yrs posted by stachu3d

cisco 7206 and IOS 12.4 with nat problem

**** Post for FREE via your newsreader at post.usenet.com **** Hi ,all. I've configured nat on my 7206 with IOS12.4 ,th...
0 comments posted 21yrs
posted by pyf
0 comments posted 21yrs posted by pyf

Switch PVLANS and Pix

Hi all!! I'd like to build the following network architecture: At this time on our server farm 6500 switches' we have a...
0 comments posted 21yrs
posted by danibyte27
0 comments posted 21yrs posted by danibyte27

pb with load balancing using igrp variance

Hello. I already did that many times, but this time, I'm not able to find out why it doesn't work. I've got a 2600 rout...
0 comments posted 21yrs
posted by bartol_78SPAMSUXXX
0 comments posted 21yrs posted by bartol_78SPAMSUXXX

LoopBack Interface

Can anybody help me in the following subject? Situation 1. Router 1 (2500 series) have 2 Serial Interface connected to...
4 comments posted 21yrs
posted by sabya.ghosh
4 comments posted 21yrs posted by sabya.ghosh

Cisco 2600 using Enable

Using "enable" does not work on a Cisco 2600 Router. Any idea why? Is there another command to use? Marcus ******
4 comments posted 21yrs
posted by tobhamlet
4 comments posted 21yrs posted by tobhamlet

C3640 VLAN Trunk

My 3640 series router running 12.4 Firewall feature set no encryption (c3640-io3-mz.124-1a.) does not have the command...
5 comments posted 21yrs
posted by stormrunner'_removethis'
5 comments posted 21yrs posted by stormrunner'_removethis'

VLAN Basics

My 3640 series router running 12.4 Firewall feature set no encryption (c3640-io3-mz.124-1a.) does not have the command...
1 comments posted 21yrs
posted by stormrunner'_removethis'
1 comments posted 21yrs posted by stormrunner'_removethis'

Contend Switch

If you know. Can I config in HA a CSS11500 and LD400 Series for SLB? Thanks
0 comments posted 21yrs
posted by estebangbrown
0 comments posted 21yrs posted by estebangbrown

help cleaning my nat inside list

Hello I think i will clean up my nat inside list this weekend and my rip configuration. First I have inside 10.10.1.0 1...
0 comments posted 21yrs
posted by jcharth
0 comments posted 21yrs posted by jcharth

2gig SFP/GBICS??

Someone I know says that Cisco make SFP 2Gig transcievers (possible dual use fiberchannel/Ethernet) that can be used in...
1 comments posted 21yrs
posted by joe
1 comments posted 21yrs posted by joe

Multiple QLLC X.25 line to SNAsw via HPR/IP

Hi all, I have a big problem. I have a router which has 3 X.25 lines configured to accept QLLC calls from a logical pho...
0 comments posted 21yrs
posted by cisco
0 comments posted 21yrs posted by cisco

VLAN and Wireless config question

I currently have the following setup- (4510 Gi7/48) - (1310 Bridge 1) - (1310 Bridge 2) - (2950 fa0/24) I have the 4510...
1 comments posted 21yrs
posted by nospam
1 comments posted 21yrs posted by nospam