Cisco Systems

  1. Home
  2. Cisco Systems
14705 Threads Posts
to

Worth reading in Cisco Systems

Cisco OER and NAT

Does anyone have a configuration example of OER w/ NAT for a small remote office where the MC/BR are on the same router...
0 comments posted 21yrs
posted by k_sallee
0 comments posted 21yrs posted by k_sallee

VoIP: UDP Packet compression to save bandwidth...

I am running VoIP services on 1.2Mb realtime link (anything above the bandwidth will be dropped). The voip protocol is...
5 comments posted 21yrs
posted by groobo
5 comments posted 21yrs posted by groobo

Cisco PIX 501 Firmware Upgrade

Hello, My company is using a Cisco PIX 501 with firmware 6.3(4) and would like to upgrade to the latest version. I have...
1 comments posted 21yrs
posted by gremln007
1 comments posted 21yrs posted by gremln007

Turn off DHCP on a Cisco 806

I have a cisco 806 router, that has been recently reset with factory defaults. Anyway, I think it seems to now be set t...
3 comments posted 21yrs
posted by simonpearson
3 comments posted 21yrs posted by simonpearson

Syslog all issued commands

I have mostly 3750 switches running (C3750-IPSERVICESK9-M), Version 12.2(25)SEC, RELEASE SOFTWARE (fc2), and I am tryin...
0 comments posted 21yrs
posted by mlick2
0 comments posted 21yrs posted by mlick2

Cisco to acquire Nortel?

Yesterday in Houston, a Nortel representative said to a customer that a Cisco acquisition of Nortel is in the works. He...
12 comments posted 21yrs
posted by ramon
12 comments posted 21yrs posted by ramon

Correct IOS for 2610 & 2620 ADSL WIC support

Hi folks, I have both a 2610 & 2620. What are the correct IOS versions i should use for them to recognise my new ADSL WI...
0 comments posted 21yrs
posted by watt
0 comments posted 21yrs posted by watt

IOS descriptions and IOS for the 3560

I just brought in a 3560 switch that has 12.2(25)SEB2 installed. Looking at the Cisco site I see that 12.2(25)SEC2 and...
1 comments posted 21yrs
posted by nospam
1 comments posted 21yrs posted by nospam

Pix 515 checksum error after update

I have a serious problem with Pix 515 UR. I have upgraded the system to 6.3.5 and the Pix didn't boot after reload. The...
0 comments posted 21yrs
posted by janslu
0 comments posted 21yrs posted by janslu

PPP and challenges that aren't really spoofed

I've a Cisco 837 running 12.4(1a): I'm using a UK ISP that uses BTs wholesale ADSL product (PPPoATM). I've just tried s...
0 comments posted 21yrs
posted by spam
0 comments posted 21yrs posted by spam

show ver

hello , would any 1 know af a document of website that gives a general breakdown of what the show ver is displaying whe...
3 comments posted 21yrs
posted by mark
3 comments posted 21yrs posted by mark

Service Policy

I am having trouble attaching service-policies, in particular LLQ and CBWFQ to virtual access interfaces that are deriv...
0 comments posted 21yrs
posted by danielh
0 comments posted 21yrs posted by danielh

ISR - VPN Client IP and Subnet mask no DNS

Hi, I've managed to setup an ISR 800 with VPN, but when the client connects it only gets an IP, Subnet mask but no DNS...
0 comments posted 21yrs
posted by noemail
0 comments posted 21yrs posted by noemail

Pix OS 6.3(5)

Hi Guys, I have just receive 2 new PIXes with 6.3(5) Are there already known bugs in the 6.3(5) Until now I used the 6.3...
1 comments posted 21yrs
posted by please
1 comments posted 21yrs posted by please