Cisco Systems

  1. Home
  2. Cisco Systems
14705 Threads Posts
to

Worth reading in Cisco Systems

exec-timeout on line

Hi all, If I have exec-timeout on line defined as exec-timeout 0 1, and on serial int on that line dialer-idle timeout 0...
2 comments posted 20yrs
posted by vinan.xinxn
2 comments posted 20yrs posted by vinan.xinxn

cisco 7206 as (B|N)AS and per-user configuration

Hi I'm using an 7206 as BRAS behind an IP based DSLAM PPPoE sessions are terminated against radius properly. Specific r...
1 comments posted 20yrs
posted by arnevt
1 comments posted 20yrs posted by arnevt

QoS or CoS?

here's what i need: prioritize traffic over a 100Mbps metropolitan area network -- give things running over particular...
1 comments posted 20yrs
posted by 2333
1 comments posted 20yrs posted by 2333

Blocking a MAC address at the router

ANybody have a simple method for blocking a MAC address or (less effective) an IP address. We don't want to amend ACLs...
11 comments posted 20yrs
posted by DigitalVinyl
11 comments posted 20yrs posted by DigitalVinyl

7912 Firmware anyone

Hi Guys, To save me buying yet another smartnet does anyone have the 7912 firmware that i could have? Cheers ----------...
0 comments posted 20yrs
posted by nathan.ronchetti
0 comments posted 20yrs posted by nathan.ronchetti

Firewall software enhancement suggestion

I manage an Internet facing PIX firewall for an external customer which logs all denied traffic for later analysis. Thu...
0 comments posted 20yrs
posted by ultimotion
0 comments posted 20yrs posted by ultimotion

cisco 827 firewall and servers inside.

(supersedes ) hi, I'm newbie in cisco's world, and dont know too much about access lists. I have to read :) I have a 82...
0 comments posted 20yrs
posted by none
0 comments posted 20yrs posted by none

QoS/ToS Support in Cisco 2600 Router

Hi, I have a Cisco 2621XM router for my VOIP cercuit. This router is doing only routing and all the VOIP process is don...
1 comments posted 20yrs
posted by somudrodev
1 comments posted 20yrs posted by somudrodev

Disconnect and reconnect ADSL on C827

Hi, I wonder what's the best way to disconect, then reconnect to ISP on Cisco 827. My ISP disconnects me after 24h upti...
3 comments posted 20yrs
posted by none
3 comments posted 20yrs posted by none

Cisco 1811: V.92 configuration

I'm having a problem to configure V.92 modem on Cisco 1811 to dial-up and stay connected till I power off the router. [...
0 comments posted 20yrs
posted by joean.sian
0 comments posted 20yrs posted by joean.sian

port flapping

I 've got a problem with Catalyst 2980G. Ports on it have been flapping. This problem concern only one switch in my net...
2 comments posted 20yrs
posted by sharqi
2 comments posted 20yrs posted by sharqi

pix nat questions

checked these two docs out already, but, still no cigar. objective: a)map inside 192.168.3.0/24 to 172.16.7.0/24 (net A...
0 comments posted 20yrs
posted by _bill_
0 comments posted 20yrs posted by _bill_

Aironet and EAP-FAST

We are setting up a small WLAN in our DMZ and have several Aironet access points and a WLSE. WLAN budget is spent so no...
1 comments posted 20yrs
posted by notachance2
1 comments posted 20yrs posted by notachance2