Cisco Systems

  1. Home
  2. Cisco Systems
14705 Threads Posts
to

Worth reading in Cisco Systems

NAT: address not stolen for

I'm having some trouble with a small vlan and nat setup. Only one of my vlans are being nat'd out to the internet. With...
2 comments posted 20yrs
posted by biscotti.macdonald
2 comments posted 20yrs posted by biscotti.macdonald

Cisco 871 router and WEP WPA-PSK

I am trying to configure a Cisco 871 integrated services router to use both WEP and WPA-PSK. The issue I am having is t...
0 comments posted 20yrs
posted by mlopez
0 comments posted 20yrs posted by mlopez

Cisco VPN Client Issues

I get the following error message when trying to connect to a remote site: "The client did not match the firewall polic...
7 comments posted 20yrs
posted by sgtcasey
7 comments posted 20yrs posted by sgtcasey

How to integrate RADIUS with IOS-Router

Hi together, i'm looking for some documentation on how to integrate RADIUS into Cisco Network. As i'm new to that confi...
2 comments posted 20yrs
posted by tt
2 comments posted 20yrs posted by tt

Cisco 1750 Config...

I have started this post... http://groups.google.com/group/comp.dcom.sys.cisco/browse_thread/thread/d4d0a3334d914821/e0...
17 comments posted 20yrs
posted by jason.sandlin
17 comments posted 20yrs posted by jason.sandlin

switchport port-security

All, I'm looking at switchport security on the Cisco switches we have on campus, 2950s & 4500s. I'm confused about the...
3 comments posted 20yrs
posted by firewallstarter
3 comments posted 20yrs posted by firewallstarter

CISCO 2600 - routing problem

Situation like this on CISCO 2600: fa0/0 - 61.XXX.XXX.243 255.255.255.248 - connected to T1 61.XXX.XXX.241 255.255.255....
2 comments posted 20yrs
posted by kris_mat
2 comments posted 20yrs posted by kris_mat

WIC 1T

We have a new ISP They provided E1 (G.703) Connection I am using Metrodata DC1000 and Cisco 1610 with WIC-1T WAN IP 100...
1 comments posted 20yrs
posted by robert.szczepanek
1 comments posted 20yrs posted by robert.szczepanek

Keeping Eth0 up

hi everybody, i've got a Cisco 837 router and I would like to know if there's a way to keep my Eth0 (which is a multi-ac...
1 comments posted 20yrs
posted by panthere76.kad
1 comments posted 20yrs posted by panthere76.kad

ISAKMP nat-traversal ?

Hi all ! Could you please give me an explication of ISAKMP NAT-TRAVERSAL command found in PIX ?? Thanks a lot ! Jov
1 comments posted 20yrs
posted by happyjov
1 comments posted 20yrs posted by happyjov

PIX 515E 7.0(4) crash

Hi, my PIX 515E with 7.0(4) firmware crashes repeatable when connecting to a specific remote VPN. show crashdebug after...
0 comments posted 20yrs
posted by adrock0501
0 comments posted 20yrs posted by adrock0501

PIX Failover with Multiple Switches.

We have 2 switches on the inside of the PIX and 2 switches on the outside of the PIX. I understand that the PIX's can f...
0 comments posted 20yrs
posted by gshine
0 comments posted 20yrs posted by gshine

DHCP across routers

We have a network at headquarters that resides on a 10.16.248.0 subnet. That network is connected via frame relay to 7...
2 comments posted 20yrs
posted by leroyd
2 comments posted 20yrs posted by leroyd

Pix NAT problem

Hi there, i need some help with a pix issue we have on our network. on our DMZ, we have a SMTP server which is to send...
6 comments posted 20yrs
posted by orion4_
6 comments posted 20yrs posted by orion4_

show connections command

Hi all, Is there a command in IOS which displays the same information as a "show connection" on a PIX? Thanks. Ikke
1 comments posted 20yrs
posted by ikkemij
1 comments posted 20yrs posted by ikkemij