Cisco Systems

  1. Home
  2. Cisco Systems
14705 Threads Posts
to

Worth reading in Cisco Systems

PIX 6.3.5, management-access command, snmp & VPN

Good day, My quick scenario is, one central location with an HA PIX 515. Crossing the wide World, 10 other sites. Some...
4 comments posted 20yrs
posted by user
4 comments posted 20yrs posted by user

A couple of questions regarding IOS software

Hi, I have now managed to get some access to the Cisco centre, but only seem to be able to download LD images, not the...
4 comments posted 20yrs
posted by me3
4 comments posted 20yrs posted by me3

PIX 515 Command for viewing realtime connections

Hey guys, Is there a cmd I can use via CLI to monitor when external connections attempt to get thru our PIX 515? I some...
4 comments posted 20yrs
posted by Christopher.Hoche
4 comments posted 20yrs posted by Christopher.Hoche

2621 XM

I have a Cisco 2621XM router and the maximum RAM it will recognize it 64 MEG. I have up graded the BOOT ROM to support...
1 comments posted 20yrs
posted by me
1 comments posted 20yrs posted by me

Reset of PIX console port.

I tried to access my PIX525 through minicom under Linux. Unfortunately I didn't disable the modem feature before starti...
3 comments posted 20yrs
posted by am
3 comments posted 20yrs posted by am

default routes PIX.

I've found the following the following sentence # If you have two interfaces, you can use two default routes. If you ha...
2 comments posted 20yrs
posted by am
2 comments posted 20yrs posted by am

script question

Hi there, What the following command means in a Ras script on a laptop for connecting to a Ras 2509 router with modems...
1 comments posted 20yrs
posted by CalinGuga
1 comments posted 20yrs posted by CalinGuga

Routing Problem - 2900XL and 2950 Switches

(Also posted on Cisco Forum) LAN has Switch A (2900XL) connected to Router. Switch B (2950) is connected to Switch A. B...
5 comments posted 20yrs
posted by ccarpenter
5 comments posted 20yrs posted by ccarpenter

flow control on gig networks

I'm setting up full flow control on my hosts (sun boxes) for both sending and receiving. I have 2 Cisco Catalyst 3550 s...
1 comments posted 20yrs
posted by nospam
1 comments posted 20yrs posted by nospam

PIX 501 access to specific IP question

Hello all I have a question I have a pix firewall in 1 remote location Interfaces outside and inside are Pblic IP addre...
2 comments posted 20yrs
posted by mor_feusz
2 comments posted 20yrs posted by mor_feusz

QoS - LLQ on Dialer (ADSL) 3725

Hello, c3725-advipservicesk9-mz.123-8.T3.bin Maybe once again I am missing something however I am unable to get QoS to...
0 comments posted 20yrs
posted by anybody43
0 comments posted 20yrs posted by anybody43

VTP mode / VLAN questions

If I have an access switch that has been part of a VTP domain in "client" mode and has learned 50 VLANS via the core sw...
2 comments posted 20yrs
posted by keithdew
2 comments posted 20yrs posted by keithdew

4 T1 WIC for 3640?

I've ordered four new T1s from MCI for 6 Mbps Internet service. I plan to use an existing 3640 router. Is there a quad...
5 comments posted 20yrs
posted by bsimon
5 comments posted 20yrs posted by bsimon

Port forwarding

Can I use my PIX to forward any HTTP request to HTTPS?
10 comments posted 20yrs
posted by just1coder
10 comments posted 20yrs posted by just1coder

Cat609 Supervisor card IOS upgrade/downgrade

I've got a Catalyst 6509 with two supervisor cards, one active and one standby. One of these cards has failed and so I'...
5 comments posted 20yrs
posted by mandrake440
5 comments posted 20yrs posted by mandrake440