Cisco Systems

Cisco Security Manager, how does the policy manager handle precedence?

The CSM can push out policies (for example VLAN 3 can talk to VLAN 12 only on port 22) throughout the enterprise. This...

0 comments posted 18yrs

posted by kippb

0 comments posted 18yrs posted by kippb

VPN not connected with global IP

Hi I have a PIX 6.1 with the following configuration (not shown fully) access-list incoming permit gre any any access-l...

0 comments posted 18yrs

posted by soup_or_power

0 comments posted 18yrs posted by soup_or_power

VPN/ADSL/Wireless for small office?

If this is not the correct, forum, please point me at one that is ;-). I'm trying to help a friend who runs a (very) sm...

1 comments posted 18yrs

posted by paul_d_smith

1 comments posted 18yrs posted by paul_d_smith

Best way to secure management dial in

Hi all I'm planning to implement dial in using a modem connected to the console port of our core routers. My concern how...

3 comments posted 18yrs

posted by fredrik.hofgren

3 comments posted 18yrs posted by fredrik.hofgren

Cisco ACNS Proxy + TCP_MISS

Hi All, In regards to the ACNS Proxy hardware appliance, I have recently installed a unit and although it is performing...

1 comments posted 18yrs

posted by damian

1 comments posted 18yrs posted by damian

Subinterfaces on a 3560

I am trying to create subinterfaces on some of the ports to allow multiple VLANs on each port. I get an error everytime...

5 comments posted 18yrs

posted by jasmine

5 comments posted 18yrs posted by jasmine

Bridge NetBEUI - can I use a PVLAN instead?

I've been meaning to use this feature. I don't know if this is such an occasion. I have two separate networks on separa...

0 comments posted 18yrs

posted by xxy

0 comments posted 18yrs posted by xxy

Cisco 870 - VPN - DMZ in four contries : Is it the way to Hell or Heaven ?

Hi One year ago I was so tired of my Novell VPN that I replaced is with 4 cisco Cisco 870 (Copenhagen, Bordeaux, Gotenb...

2 comments posted 18yrs

posted by thorkil.johansen

2 comments posted 18yrs posted by thorkil.johansen

Campus Design Problem - Redundancy, HSRP, STP, VLANs...

Access1 (Servers, Internet) / \\ / \\ L2trunk_A / \\ L2trunk_D / \\ / \\ / \\ / \\ Dist1-----------------Dist2 (L2trunk...

2 comments posted 18yrs

posted by toddedu

2 comments posted 18yrs posted by toddedu

Design Considerations

For you creative/design type individuals who love to give their 2 cents. I would like to hear ideas. Background on my s...

0 comments posted 18yrs

posted by 21garcia21

0 comments posted 18yrs posted by 21garcia21

ASA 5500: connection is still on after the ACL is modified

The answer may be simple but my searches could not show me any solution. On my ASA 5510, I have an access-list that has...

2 comments posted 18yrs

posted by dt1649651

2 comments posted 18yrs posted by dt1649651

ASA 5505 ASDM Startup Wizard - does it work at all?

I got a Cisco ASA 5505 with Cisco Adaptive Security Appliance Software Version 7.2(2). Normally I always configure my e...

2 comments posted 18yrs

posted by ts-usenet0709

2 comments posted 18yrs posted by ts-usenet0709

Can't remove a line from Cisco 2620 config

Hello. I have had a Cisco 2620 LAN router that we have used for years. I recently purchased another 2620 router as a ba...

4 comments posted 18yrs

posted by corbinoreilly

4 comments posted 18yrs posted by corbinoreilly

Pix 506e - 1721 problem

Hi all, I need to change my border router to a 1721 with one sdsl and one adsl interface this then connects to a pix 50...

0 comments posted 18yrs

posted by handley88

0 comments posted 18yrs posted by handley88

Force VPN Client to "Main Mode"?

Anyone know how to do the above? It seems that with "Shared Key" the client always uses Aggressive Mode. Thanks, Paul DS...

0 comments posted 18yrs

posted by paul_d_smith

0 comments posted 18yrs posted by paul_d_smith