1. Home
  2. Cisco Systems
  3. VPN not connected with global IP

VPN not connected with global IP

Hi I have a PIX 6.1 with the following configuration (not shown fully)

access-list incoming permit gre any any access-list outgoing permit gre any any

global (outside) 1 209.178.198.252-209.178.198.254 global (outside) 1 209.178.198.247

nat (inside) 0 access-list nonat nat (inside) 1 0.0.0.0 0.0.0.0 0 0

I am trying to connect to a VPN server on 24.73.218.218. When a host in the inside network is assigned by PIX the IP 209.178.198.247 (as verified at dnsstuff.com) the VPN is denied. Whereas a host inside the network is assigned by PIX

209.178.198.252 thru 254 the VPN is successful.

How can I configure PIX to not assign 209.178.198.247 to a host? Is there a better solution?

I have been raking my head all week. I'd be grateful if Walter or someone could kindly answer.

Thanks

Reply to
soup_or_power
Loading thread data ...

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.