Cisco Systems

Dynamic IP and Static IP on same Dialer Interface

Hi All, I'm having a bit of an hard time trying to implement a configuration that I find wierd that an ISP provides it...

1 comments posted 17yrs

posted by mafonso

1 comments posted 17yrs posted by mafonso

ASA 5510 restarts itself several times a day

ASA 5510 seems to work normaly but it restarts itself a dozen times a day. Does anyone have an idea what might cause th...

5 comments posted 17yrs

posted by morph.news

5 comments posted 17yrs posted by morph.news

asa 5505 "deny src outside" ; I keep knocking but I cant come in !

The log viewer is showing " Deny tcp src outside ....by access group "outside_access_in" , and believe me that was not...

3 comments posted 17yrs

posted by support

3 comments posted 17yrs posted by support

blocking all ICMP for group on Pix506e?

Hi: I have a couple of websites on distinct IPs behind a PIX506e with 1-to-1 NAT from the public to the private IPs. Ac...

2 comments posted 17yrs

posted by geeky

2 comments posted 17yrs posted by geeky

Announcing to BGP an OSPF route from area 0

Hello folks, I'm facing problem with BGP and OSPF that I'm unable to solve so I'm asking for your help. There is a rout...

2 comments posted 17yrs

posted by piotrs

2 comments posted 17yrs posted by piotrs

Connect a cisco catalyst 3524XL to a Cisco 6500 ? Auto-MDI or crossover cable

Hi If i connect the C3524XL to a Cisco 6500 with a classic RJ45 cable, i don't have the link. If i use a crossover cabl...

7 comments posted 17yrs

posted by mag

7 comments posted 17yrs posted by mag

IPSEC VPN between 506e and 501

Hi all, Im having trouble with a site to site ipsec vpn connection. Yesterday I had to change over to a new internet co...

2 comments posted 17yrs

posted by handley88

2 comments posted 17yrs posted by handley88

MRTG and FWSM identical info on all ports

Running MRTG 2.15.0 and version 3.1(3) on our FWSM in a 6509. When looking at the results all of the interfaces from th...

2 comments posted 17yrs

posted by joey29034atyahoodotcom

2 comments posted 17yrs posted by joey29034atyahoodotcom

Port Channel config Question with Private-vlan

Wondering if someone can help out here with this setup. I have a 3750 switch stack (Stack-1). I created a 2nd stack (St...

1 comments posted 17yrs

posted by spacemancw

1 comments posted 17yrs posted by spacemancw

PIX 515 - Open all ports except a few

Hello. Is there a way I can open all ports to a particular IP except ports 25 and 110? I know the command "access-list...

7 comments posted 17yrs

posted by corbinoreilly

7 comments posted 17yrs posted by corbinoreilly

Transfer from voicemail prompt

We have installed Cisco Call Manager Express with Unity Express. We are wondering how to allow users calling in to dial...

0 comments posted 17yrs

posted by xzul2000

0 comments posted 17yrs posted by xzul2000

Replication errors from a pix 525

I've got a pair of PIX 525 in an active/standby configuration. I recently made some fairly large configuration changes...

0 comments posted 17yrs

posted by pfisterfarm

0 comments posted 17yrs posted by pfisterfarm

Cisco models and supported modules

Hello, I believe Cisco's website has some section where it lists supported modules for each platform. I cant seem to fi...

1 comments posted 17yrs

posted by cciestudy

1 comments posted 17yrs posted by cciestudy

show log filtering

Hi, does anyone know a way that I make the show log command show only logs for a particular interface, (we have some fu...

1 comments posted 17yrs

posted by die.spam

1 comments posted 17yrs posted by die.spam

configuring commands in advance

hi, cisco router or switch allows us to configure something though part of the configuration which it is referencing is...

2 comments posted 17yrs

posted by sinbad.sinbad

2 comments posted 17yrs posted by sinbad.sinbad