Cisco Systems

  1. Home
  2. Cisco Systems
14701 Threads Posts
to

simple tcl command not working`

Group, I am trying to create a file in flash and/or nvram using tcl, and I am having no good results. Has anyone had an...
0 comments posted 17yrs
posted by w0unx
0 comments posted 17yrs posted by w0unx

etherchannel on css or ace appliance?

Haven't seen any documented support for etherchannel. Curious if it's a possibility.
0 comments posted 17yrs
posted by billf
0 comments posted 17yrs posted by billf

ip route to null0 blacklisting

Suddenly, I feel very much like a newbie... For quite some time, our perimeter 2600 T-1 router (12.1) has had ip route...
4 comments posted 17yrs
posted by bntgoogle
4 comments posted 17yrs posted by bntgoogle

Anti Spoofing FWSM V3.2(4)

Hi All, I want to know if there is a way to disable anti-spoofing on a specific ip on network or interface. I understan...
1 comments posted 17yrs
posted by jackwik
1 comments posted 17yrs posted by jackwik

IPv6 (protocol 41 pass through) with Pix 525

This is on a Pix 525 with v7.2(1) software I am trying to configure a single host (linux) behind the firewall. I create...
0 comments posted 17yrs
posted by vrillusions+usenet
0 comments posted 17yrs posted by vrillusions+usenet

restrict PC traffic speed on the lan

Cisco 2651XM router I'm looking for a sample config or help which would enable me to restrict the traffic speed of a pa...
4 comments posted 17yrs
posted by tg
4 comments posted 17yrs posted by tg

VLANs routed with C3560 and Proxy ARP

We have several offices and use a provider to route betwean the private networks. At one of the offices we have the net...
7 comments posted 17yrs
posted by morph.news
7 comments posted 17yrs posted by morph.news

MDS SAN and scaling with bladeservers

How are others dealing with the issue of keeping the SAN fabric simple by using as few inter-switch links as possible a...
1 comments posted 17yrs
posted by friedl
1 comments posted 17yrs posted by friedl

Layer 4 EtherChannel Load Balancing

Hello all I am currently using Cisco 3750E StackWise+ Switches. However, it seems that this type of switch only support...
5 comments posted 17yrs
posted by miguelsanders
5 comments posted 17yrs posted by miguelsanders

RSTP Diameter question.

If I like to make a ring topology using RSTP how many maximum switch number can I connect to and based on what? TIA, st
1 comments posted 17yrs
posted by aaabbb16
1 comments posted 17yrs posted by aaabbb16

ASA Hairpin routing w/NAT

Has anyone gotten the hairpin routing to work w/NAT? I currently have an old vpn concentrator and a pix515(v6 code) tha...
0 comments posted 17yrs
posted by chris.smith
0 comments posted 17yrs posted by chris.smith

Wireless Network Design

I set up a wireless router in my upstairs home office (providing good coverage for the second floor) and a second one d...
8 comments posted 17yrs
posted by nobody
8 comments posted 17yrs posted by nobody

Cisco PIX NAT Translation

Hi all One I would put out there in the hope there might be a better way of doing this Currently we have a PIX that doe...
1 comments posted 17yrs
posted by scootyjthompson
1 comments posted 17yrs posted by scootyjthompson