Cisco Systems

internet access by different vlan

hi, hi create different vlan 10,20, 30 ,40,50,60.they r not communicate each other vlan with vlan 10.now i want to acce...

2 comments posted 17yrs

posted by arupbiet

2 comments posted 17yrs posted by arupbiet

Resetting a Switch to Factory Settings

I have a couple of 2900 series switches which we have inherited and need to set them back to factory settings so I can s...

3 comments posted 17yrs

posted by no

3 comments posted 17yrs posted by no

E1 on a Switch?

I have 2 2821 routers set up for hardware failover. The only part I currently have to do manually is physically moving...

3 comments posted 17yrs

posted by no

3 comments posted 17yrs posted by no

Lightstream 1010

Just picked up a Lightstream 1010 off ebay to add to my lab and was wondering which PAMs would be most useful. Lab curr...

2 comments posted 17yrs

posted by talonswap

2 comments posted 17yrs posted by talonswap

MAC Address and Logical Router Interface

Hi, Do all the logical interfaces on a physical Ether interface have the same MAC address? If not how is the MAC address...

3 comments posted 17yrs

posted by usenet05

3 comments posted 17yrs posted by usenet05

Proof of Concept needed.

I am working on a project for a new remote office. Our current VPN/ Network set up has us using EOL'd equipment from an...

4 comments posted 17yrs

posted by timpar

4 comments posted 17yrs posted by timpar

ASA 55xx oid active user

Hi all Someone knows oid to get numbers of remote access users and active l2l tunels ? thx Ted

1 comments posted 17yrs

posted by ted

1 comments posted 17yrs posted by ted

Setup ASA5505

Hi All, I relatively new to ASA5505 devices, but I try to understand the following: My ISP provides me with 4 static IP...

1 comments posted 17yrs

posted by no

1 comments posted 17yrs posted by no

controlling web access via a PIX/ASA

After a day of research I've come to understand (maybe) the range of methods for controlling web access via a PIX/ASA:...

1 comments posted 17yrs

posted by support

1 comments posted 17yrs posted by support

callmanager express

is there a legit way I can get hold of Callmanager Express 4.1 or earlier? I've been told this is what I need for a 260...

5 comments posted 17yrs

posted by tg

5 comments posted 17yrs posted by tg

phase 1 isakmp failing

Hi, Can someone please assist? Thanks *Nov 4 20:56:26.221: ISAKMP:(0:0:N/A:0):purging node 2095033855 *Nov 4 20:56:26.2...

1 comments posted 17yrs

posted by jh0u

1 comments posted 17yrs posted by jh0u

ios / nat

Dear all, just wanted some help with what i think is a NAT configuration issue. the requirement is to place an 877 with...

0 comments posted 17yrs

posted by ipcomp1

0 comments posted 17yrs posted by ipcomp1

catalyst 4503-e and 2960 CLI

Hi friends, I have a annoying problem that i'm no longer able to get to the "switch>" prompt by pressing "enter" when a...

2 comments posted 17yrs

posted by skatal

2 comments posted 17yrs posted by skatal

Stopping the erase flash: before copying? message

This ought to be easy. When copying from tftp to flash, the router asks "erase flash: before copying? [confirm]. How do...

2 comments posted 17yrs

posted by ttripp

2 comments posted 17yrs posted by ttripp

cisco ip phones and 3cx

I've been told the cisco 7940 ip phone works with the 3cx soft pbx, (http://www.3cx.com/sip-phones/cisco-7940.html) but...

0 comments posted 17yrs

posted by tg

0 comments posted 17yrs posted by tg