What is the difference between the two modules WIC-1DSU-T1 and WIC-1DSU-T1-V2 ?
I need to connect two T1 lines for double bandwith and backup if one T1 fails. Do I have to get the V2 or any of them will do what I need ?
Thanks,
DT
WIC-1DSU-T1 and WIC-1DSU-T1-V2
Apr 12, 2005
4 Replies
The WIC-1DSU-T1-V2 is an updated version of the WIC-1DSU-T1 interface card (which has reached End-of-Life [EoL]/End-of-Sale [EoS]), that offers additional supported features with the same performance:
formatting link
Sincerely,
Brad Reese BradReese.Com Cisco Resource Center Toll Free: 877-549-2680 International: 828-277-7272 Website:
formatting link
formatting link
Again, thanks for your helpful reply.
DT
formatting link
Again, thanks for your helpful reply.
DT
Also be aware that there are older platforms out there which accept the WIC-1DSU-T1 but will not reliably recognize the WIC-1DSU-T1-V2. Examples include the 2610 and 2611 routers (not to be confused with the XM models with the same numbers). Use care and check the hardware compatability list.
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required