1720 WIC-1T and WIC-1DSU-T1

Nov 17, 2006 4 Replies
S
1720 WIC-1T and WIC-1DSU-T1 open original image

currently trying to convert from frac T1 to full T1


1720 has WIC-1T in slot WIC0 (currently working)

stuck the WIC-1DSU in WIC1 and WIC1(on router) light says ok



CD light on 1DSU card is NOT on



ISP sees loop back to end of cable (thru smart jack, and drop cable from smart jack)



pressing loopback button on 1DSU card, still doesnt see it



took both cards out, stuck 1DSU card in WIC0 slot, still no CD light



SHOW DIAG shows: WIC Slot 1: Unknown WAN daughter card



docs shows 1DSU card will work on all IOS



IOS is Version 12.1(8c)



do i need to somehow "turn-on" or enable the card?


TIA



Vote
Twitter Facebook LinkedIn
R

I'll assume you made the necessary changes in the config, you didn't mention it.

Is the new card a wic-1dsu-t1 OR a wic-1dsu-t1-v2? the newer card requires a newer IOS, your "Unknown WAN daughter card" is typical of this issue.

Vote
Twitter Facebook LinkedIn
B

The WIC-1DSU-T1 V2 is not supported in the 1700 series, it's not simply a software issue..... You MUST use a V1 card in there. If it is a V1 card, it is not hot swapable, router must be rebooted for it to be recognized properly.

Vote
Twitter Facebook LinkedIn
S

its a V2

looks like i need the new IOS

formatting link
now i gotta figure out how to get the IOS...i need to f> I'll assume you made the necessary changes in the config, you didn't mention > it.

Vote
Twitter Facebook LinkedIn
S

got it now, cant get back to my internal gateway have: ip default-gateway 10.0.1.30 ip classless ip route 0.0.0.0 0.0.0.0 Serial0.1 ip route 10.0.1.0 255.255.255.0 10.0.1.30 no ip http server

that should do it right? i have a route and the default ping and tr dont get me there...what am i missing?

also, memory question... Head Total(b) Used(b) Free(b) Lowest(b) Largest(b)

Processor 808A7A54 16090540 1719668 14370872 14219884

1427599

the bin file is 9meg...where is it going? can i have both there on the box?

TIA

Stanguru wrote:

formatting link

Vote
Twitter Facebook LinkedIn

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required