Cisco Systems

  1. Home
  2. Cisco Systems
14705 Threads Posts
to

Worth reading in Cisco Systems

troubleshoot the site-to-site vpn Problem

Hi, i have set up a site-to-site VPN, but has problem which I can not access the network access and network resources b...
3 comments posted 21yrs
posted by bensonlei
3 comments posted 21yrs posted by bensonlei

router cisco 827-4v

Ciao a tutti, ho un problema con un 827-4v. Non riesco a configuarare il servizio voip perche' non accetta i miei coman...
1 comments posted 21yrs
posted by sara
1 comments posted 21yrs posted by sara

Is RIP and BGP in a same Router?

Hi all, Can anybody tell me, Is the RIP and BGP are used in the same Router/Switch? Pls help me out as early as possible...
3 comments posted 21yrs
posted by abbas.s
3 comments posted 21yrs posted by abbas.s

VLAN case .. help..!!!!

dear fellows.. here is the case and see if some one can help me. our network comprises of 400 work stations and 1721 ro...
1 comments posted 21yrs
posted by hitesh.vinzoda
1 comments posted 21yrs posted by hitesh.vinzoda

Upgrading Cisco 3750 switch stack with bin file

Hi, does anyone has any idea to go about upgrading the ios for a 3750 switch stack using binary file? Cisco website has...
2 comments posted 21yrs
posted by sunnymonk74
2 comments posted 21yrs posted by sunnymonk74

Cisco 831 Configuration Question

Hello, I am trying to configure a Cisco Router 831 so that each port on the 4 port switch cannot see the other three po...
6 comments posted 21yrs
posted by trichter_cdg
6 comments posted 21yrs posted by trichter_cdg

Year pix was launched

What year was the pix launched? Thanks
1 comments posted 21yrs
posted by black42
1 comments posted 21yrs posted by black42

Cisco 2611 and BGP

Ok, I have my nomex on... I have a customer with a Cisco 2611, 32meg memory, 16mb flash, one T1 W1C, one ADSL W1C. Cust...
6 comments posted 21yrs
posted by lesmith
6 comments posted 21yrs posted by lesmith

Load balacing What's the best way.

I like to use two IEEE802.11b radiolinks for connecting my network. I want to use loadbalancing for stacking the capaci...
0 comments posted 21yrs
posted by pa5-_wilgeen
0 comments posted 21yrs posted by pa5-_wilgeen

PIX 501 Split Tunnel?

need to be able to split tunnel from a remote office using a 501. Situation follows: Core Site: PIX 535 Remote Site: PI...
5 comments posted 21yrs
posted by daniel.a.murray
5 comments posted 21yrs posted by daniel.a.murray

Asking for directory listing on AP 350 flash:

Can anyone give me the directory listing of the AP 350 flash: memory (including sub-dir) running IOS 12.2.x or 12.3.x;...
2 comments posted 21yrs
posted by atcat
2 comments posted 21yrs posted by atcat

Deny

How can I block all inbound connection attempts from a particular IP address?
2 comments posted 21yrs
posted by just1coder
2 comments posted 21yrs posted by just1coder

Setting u a Rouer - help needed.

I am training for my CCNA, and have got a bit stuck on something regarding VLANs. I have a 2950 switch, and want to set...
3 comments posted 21yrs
posted by jedimaster.rob
3 comments posted 21yrs posted by jedimaster.rob

dhcp server's range

I searched the group but it seems I could not submit the correct keywords to find out the solution. I am looking for th...
6 comments posted 21yrs
posted by dt1649651
6 comments posted 21yrs posted by dt1649651