Cisco Systems

  1. Home
  2. Cisco Systems
14705 Threads Posts
to

Worth reading in Cisco Systems

https traffiic on a PIX 515

I've gotten most of the problems with my PIX 515 resolved, but I have one remaining. I can get normal http (www) traffi...
6 comments posted 21yrs
posted by "B Squared"
6 comments posted 21yrs posted by "B Squared"

QoS on ubr7200 -- Wrong Speeds

We have a package for 256k/128k, we built the configuration files and started deploying it. The other day a customer ca...
0 comments posted 21yrs
posted by docsisboy
0 comments posted 21yrs posted by docsisboy

Config of a 515 PIX

Please ... I have some questions about the configuration of a 515 Pix : 1) What are commands to permit hosts on DMZ3 to...
4 comments posted 21yrs
posted by happyjov
4 comments posted 21yrs posted by happyjov

ConfigMaker - Device Information is corrupted

I want to autoedetect the configuration from a 1603 router. It failed with the information "Device information is corru...
0 comments posted 21yrs
posted by PaulJawlinski
0 comments posted 21yrs posted by PaulJawlinski

Modem dial in remote admin access - wic-1am config

Can someone post a config or guide me to a doc on how to configure the wic-1am modem card so I can use my window 2000 l...
1 comments posted 21yrs
posted by rsiffredi
1 comments posted 21yrs posted by rsiffredi

Please !

Good evening has all! I seek this firmware for my 1924 En. (cat1900EN.9.00.07.bin ) If you have a copy thanks for me mak...
0 comments posted 21yrs
posted by dugoisclaude
0 comments posted 21yrs posted by dugoisclaude

Reset Cisco uBR904 to factory defaults

Hi, I bought myself a used uBR904 cable router. I hooked it up to the network and was hoping that the DHCP server would...
0 comments posted 21yrs
posted by newsDEL
0 comments posted 21yrs posted by newsDEL

Multiple Active Internet Links

I have a cisco 3600 router that is currently connected to one ISP. Is it possible to connect a second link and have bot...
3 comments posted 21yrs
posted by scoutts
3 comments posted 21yrs posted by scoutts

Explain this a little better please.

I copied this statement from a Cisco training tutorial I just browsed. The last sentence in the paragraph is not very c...
3 comments posted 21yrs
posted by fwells11
3 comments posted 21yrs posted by fwells11

Have a got an MTU problem? Advice needed

Hi Group, We seem to having issues over a Site-To-Site VPN (PIX to CP-NG), this really shows itself when users are tryi...
1 comments posted 21yrs
posted by jason.nichols
1 comments posted 21yrs posted by jason.nichols

PIX on a Stick?

So I need a ton of DMZ ports all of a sudden. I know that the PIX supports VLAN's, and I also know that the PIX will no...
4 comments posted 21yrs
posted by wil
4 comments posted 21yrs posted by wil

4th nic for pix 525

Hiya, I'm thinking of installing another NIC on our Cisco PIX 525. Currently there are 3 Fast E interfaces on it, i.e....
1 comments posted 21yrs
posted by wkwoon
1 comments posted 21yrs posted by wkwoon

PIX: How are packets travelling through it?

Hi, is there any "plan" (flow diagram or something) how packets are travelling through the PIX (7.x) and how certain de...
1 comments posted 21yrs
posted by adrock0501
1 comments posted 21yrs posted by adrock0501

Cisco 3620 VPN not listening UDP 500 / 4500

My Cisco 3620 IOS router is not listening on ports 500 and 4500 to setup the VPN connection. what could be wrong with m...
1 comments posted 21yrs
posted by jbaggen
1 comments posted 21yrs posted by jbaggen

Tricky NAT config on a 1721

The what: Without going too far into the 'why', here is what I need. I have 3 network segments (192.168.1.0/28; 192.168...
2 comments posted 21yrs
posted by drice
2 comments posted 21yrs posted by drice