Cisco Systems

14705 Threads Posts
to

Index persist

Hi all, I'm using SNMP to monitor the network of our company and I'm facing a problem than I can't find a solution so I...
0 comments posted 21yrs
posted by doesntreallymatter
0 comments posted 21yrs posted by doesntreallymatter

Questions on "sysopt connection permit-ipsec"

Some questions regarding the above command. From my understanding this command implicitly generates the following for a...
2 comments posted 21yrs
posted by test_nospam
2 comments posted 21yrs posted by test_nospam

Pix: VPN Radius Accounting

Hello, I posted this five days ago but didn't get any response. So here it goes again: I would like to have the Pix (So...
1 comments posted 21yrs
posted by gartmann
1 comments posted 21yrs posted by gartmann

URL Forwarding possible with the Cisco Pix?

Hello, We are in the process of migrating to the Cisco PIX from Microsofts ISA server. We only have a single public IP...
1 comments posted 21yrs
posted by markmosley
1 comments posted 21yrs posted by markmosley

PIX pinging

seem to recall that the PIX explicitly allows for ping to its interfaces, i.e. permit icmp inside any what if at the sa...
1 comments posted 21yrs
posted by test_nospam
1 comments posted 21yrs posted by test_nospam

SOHO VPN design thoughts

Hello, I'm hoping someone can help me here as I don't seem to be able to find the information on the cisco site. I need...
4 comments posted 21yrs
posted by Timo.Green
4 comments posted 21yrs posted by Timo.Green

Rate limiting on catalyst 3500xl series

hi, is there a solution to limit bandwidth by port or by vlan on catalyst3500xl? something like traffic shape on cisco...
1 comments posted 21yrs
posted by cro01
1 comments posted 21yrs posted by cro01

VG224 MGCP gateway

Hi, Has anyboyd used a VG224 Analogue Gateway with Call Manager. We have configured it as detailed on the Cisco website...
0 comments posted 21yrs
posted by simon.blewitt
0 comments posted 21yrs posted by simon.blewitt

Cheap CISCO routers ?

What is the cheapest CISCO router with atleast the following specs : 1. 2 Ethernet connections (preferably 10/100 on bo...
4 comments posted 21yrs
posted by support
4 comments posted 21yrs posted by support

Difference Between Collision and Broadcast Domain.

Hello All, I have a little bit comfusion regarding collision domain and broadcast domain. Hope friends you will clarify...
1 comments posted 21yrs
posted by ashish.charde
1 comments posted 21yrs posted by ashish.charde

1711 - remove fixed WIC card?

HI all. I have a Cisco 1711 which I have been using for some time with my existing internet connection. I have decide t...
2 comments posted 21yrs
posted by maillist
2 comments posted 21yrs posted by maillist

IP redirect ?

Hi all ! Who can please give me simple explanations about IP ICMP REDIRECT ? How does it work ? I don't understand this...
3 comments posted 21yrs
posted by happyjov
3 comments posted 21yrs posted by happyjov

Cisco AS 5300 Quad E1 to T1 cards

Hello ! Anybody knows if exists a Cisco Quad E1/T1 card for AS5300 that can be configured either E1 either T1 interface,...
0 comments posted 21yrs
posted by nartel
0 comments posted 21yrs posted by nartel