Cisco Systems

  1. Home
  2. Cisco Systems
14705 Threads Posts
to

Worth reading in Cisco Systems

VOIP/Call Manager/ICM

Is this right group to post questions regarding the subjects above? I don't have any yet but I'm sure I will in time. Th...
2 comments posted 21yrs
posted by Peter
2 comments posted 21yrs posted by Peter

Do i need to VPN module for VPN connectivity ?

I am looking at connecting a remote office to the main office for a static route. I will have a cisco 1721 at the branc...
1 comments posted 21yrs
posted by jason.sandlin
1 comments posted 21yrs posted by jason.sandlin

sh controller s 1

I have this error message "21 residual bit errors" when I use the sh controller serila 1 command. Also when I use sh in...
4 comments posted 21yrs
posted by tchia60
4 comments posted 21yrs posted by tchia60

Cisco 7960 rebild (skinny)

Can anyone point me to directions to completely nuke and rebuld a Cisco IP Phone 7960. I want to relaod factory skinny...
1 comments posted 21yrs
posted by JRiniker26
1 comments posted 21yrs posted by JRiniker26

PIX 501 snmp setup

Hi Is it possible to monitor processor utilization via snmp Thanks Peter
2 comments posted 21yrs
posted by peter_simons
2 comments posted 21yrs posted by peter_simons

Wireless on W871 does not comply with 802.11b ?

I may be wrong. My test is to check the wireless ACK packets from the Cisco AP 1200 and from the Cisco 871W. These two...
0 comments posted 21yrs
posted by dt1649651
0 comments posted 21yrs posted by dt1649651

12.4.3a for 837 not available.

Trying to download the IOS in the subject: Not Found The requested URL /[CUT]/c837-k9o3sy6-mz.124-3a.bin was not found o...
1 comments posted 21yrs
posted by am
1 comments posted 21yrs posted by am

DMVPN?

Hi all, I read that 877 can handle up to 20 VPN (I suppose among LAN-to-LAN and VPNclient) while 857 can up to 5. Are t...
0 comments posted 21yrs
posted by am
0 comments posted 21yrs posted by am

ACS - Reconfigure ACE Server config.

Hi all, Our organisation has an ACS on NT installation, and it has been configured (a L-O-N-G time ago) to use SecurID...
1 comments posted 21yrs
posted by anon
1 comments posted 21yrs posted by anon

QoS, rate-limiting, IP ACLs and the Catalyst 3750

Hello, I am tasked with limiting downstream bandwidth to a few specific hosts on a single subnet. I am trying to unders...
0 comments posted 21yrs
posted by tomaco
0 comments posted 21yrs posted by tomaco

PIX <-> Borderware VPN

Hello, I want to configure a VPN connection between a Borderware FW Release 7.0 and a PIX 506E. Does the VPN connection...
1 comments posted 21yrs
posted by wolle
1 comments posted 21yrs posted by wolle

IP, Ethernet, ATM and DHCP

Hi there I've got a setup where my core network is based on ATM and some of my distribution network is based on Etherne...
0 comments posted 21yrs
posted by lars_christesen
0 comments posted 21yrs posted by lars_christesen

Local name resolving with Cisco 3002

I have been setting up a Cisco 3002 hardware VPN to connect to our head office. So far, the following things work PING...
0 comments posted 21yrs
posted by cheese
0 comments posted 21yrs posted by cheese

Maximum active IPSec sessions

I believe that prior to PIX 7.0 OS, it was not possible to restrict the limit of active IPSec sessions that terminate on...
1 comments posted 21yrs
posted by paras
1 comments posted 21yrs posted by paras