PIX 501 snmp setup

Hi

Is it possible to monitor processor utilization via snmp

Thanks

Peter

Reply to
Peter Simons
Loading thread data ...

Here is a MRTG config for a PIX 506 for Connection -CPU - Memory

Probably good for a 501

# DEVICE number of connections currently in use by the entire firewall #Target[DEVICE_conn]:1.3.6.1.4.1.9.9.147.1.2.2.2.1.5.40.6&1.3.6.1.4.1.9.9.147.1.2.2.2.1.5.40.6:public@[IP Address] #RouterUptime[DEVICE_conn]: public@[IP Address] #MaxBytes[DEVICE_conn]: 125000 #Title[DEVICE_conn]: Connections -- DEVICE #PageTop[DEVICE_conn]: DEVICE Connections #Unscaled[DEVICE_conn]: ym #ShortLegend[DEVICE_conn]: Connections #XSize[DEVICE_conn]: 380 #YSize[DEVICE_conn]: 100 #YLegend[DEVICE_conn]: Connections #Legend1[DEVICE_conn]: Connections #Legend2[DEVICE_conn]: Connections #Legend3[DEVICE_conn]: #Legend4[DEVICE_conn]: #LegendI[DEVICE_conn]: #LegendO[DEVICE_conn]:  Usage #Options[DEVICE_conn]: gauge, growright

# DEVICE CPU load % #Target[DEVICE_cpu]:1.3.6.1.4.1.9.9.109.1.1.1.1.5.1&1.3.6.1.4.1.9.9.109.1.1.1.1.5.1:public@[IP Address] #RouterUptime[DEVICE_cpu]: public@[IP Address] #MaxBytes[DEVICE_cpu]: 100 #Title[DEVICE_cpu]: CPU LOAD -- DEVICE #PageTop[DEVICE_cpu]: DEVICE CPU Load % #Unscaled[DEVICE_cpu]: ym #ShortLegend[DEVICE_cpu]: % #XSize[DEVICE_cpu]: 380 #YSize[DEVICE_cpu]: 100 #YLegend[DEVICE_cpu]: CPU Utilization #Legend1[DEVICE_cpu]: CPU Utilization in % (Load) #Legend2[DEVICE_cpu]: CPU Utilization in % (Load) #Legend3[DEVICE_cpu]: #Legend4[DEVICE_cpu]: #LegendI[DEVICE_cpu]: #LegendO[DEVICE_cpu]:  Usage #Options[DEVICE_cpu]: gauge, growright

# DEVICE Memory Pool Used #Target[DEVICE_mem]:1.3.6.1.4.1.9.9.48.1.1.1.5.1&1.3.6.1.4.1.9.9.48.1.1.1.5.1:public@[IP Address] #RouterUptime[DEVICE_mem]: public@[IP Address] #MaxBytes[DEVICE_mem]: 33554432 #Title[DEVICE_mem]: Memory Pool -- DEVICE #PageTop[DEVICE_mem]: DEVICE Memory Pool Used #Unscaled[DEVICE_mem]: ymwd #ShortLegend[DEVICE_mem]: Bytes #XSize[DEVICE_mem]: 380 #YSize[DEVICE_mem]: 100 #YLegend[DEVICE_mem]: Memory Pool Used #Legend1[DEVICE_mem]: Memory Pool Used in Bytes #Legend2[DEVICE_mem]: Memory Pool Used in Bytes #Legend3[DEVICE_mem]: #Legend4[DEVICE_mem]: #LegendI[DEVICE_mem]: #LegendO[DEVICE_mem]:  Usage #Options[DEVICE_mem]: gauge, growright

Reply to
mcaissie

Thanks

Peter

Reply to
Peter Simons

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.