Cisco Systems

  1. Home
  2. Cisco Systems
14705 Threads Posts
to

Worth reading in Cisco Systems

Circuit group for load-sharing

Hi, I have 4x E1 connections with 2 ISP. 2xE1 with ISP1 and 2xE1 with ISP2. I did the load balance putting the 2 defaul...
0 comments posted 20yrs
posted by cesar.fazan
0 comments posted 20yrs posted by cesar.fazan

VPN Remote Server

to: Walter Walter i had VPN site to site - but i could not have VPN remote server what I did I started PDM and run VPN w...
2 comments posted 20yrs
posted by mor_feusz
2 comments posted 20yrs posted by mor_feusz

Which image for a 3640.

Hello every body, I have a 3640 running this IOs image file c3640-ds-mz_113-10_T.bin. I would upgrade it but I don't kn...
5 comments posted 20yrs
posted by am
5 comments posted 20yrs posted by am

atm - IP management interface

Hello, Am looking into an network discovery program. Apparently it can carry out discovery if the network elements have...
0 comments posted 20yrs
posted by ton_de_winter
0 comments posted 20yrs posted by ton_de_winter

2620XM - Ethernet WIC ?

Will the Cisco 2620XM router accept an Ethernet WIC (WIC-1ENET=) ? The router has one fastethernet & one serial WIC. I c...
2 comments posted 20yrs
posted by nedtrilby
2 comments posted 20yrs posted by nedtrilby

catalyst 6500 power

we are having 2 new 6513's and 2 new 6509's, with 2 4000watt and 2 3000watt PSU's respectively. Cisco state this: All A...
7 comments posted 20yrs
posted by simon.marsden
7 comments posted 20yrs posted by simon.marsden

Cisco 851 router not allowing send mail...

I am having a hard time with this one so any help is needed and appreciated - I'm running out of options. I setup a Cis...
6 comments posted 20yrs
posted by TFConsulting
6 comments posted 20yrs posted by TFConsulting

1720 and comcast

I recently purchased a 1720 router and thanks to the help received here I have it up and running now. I have a wic-1ene...
10 comments posted 20yrs
posted by frank.lawler
10 comments posted 20yrs posted by frank.lawler

CatTools & Catalyst Macro's

Anyone out there using Kiwi CatTools and experiencing problems when trying to use Catalyst "macro" commands? If so, ple...
0 comments posted 20yrs
posted by p_spee_1
0 comments posted 20yrs posted by p_spee_1

Csico 804 ISDN-6-NO_TIMER Errors

Can any one advise on how to correct this issue: ISDN-6-NO_TIMER: errors on Cisco 804 ISDN routers. Thanks in advance....
1 comments posted 20yrs
posted by xxnonexspamxnonexx
1 comments posted 20yrs posted by xxnonexspamxnonexx

Newbie 2621xm Internet Access

Hi folks, I've recently acquired a Cisco 2621xm router. I want to be able to use it to provide internet access to my ne...
5 comments posted 20yrs
posted by dannysmithuk
5 comments posted 20yrs posted by dannysmithuk

Call Manager 5.0 Gets SIP?

Call Manager 5.0 will finally add SIP client support to the IP PBX. You can read about it here:: "Cisco Adds SIP to Cal...
0 comments posted 20yrs
posted by dgreenfield
0 comments posted 20yrs posted by dgreenfield

PIX PDM Certificate problem

I've sort of a problem, quite common but can't solve it :( I've PIX which uses certficate/radius authentication, it tal...
3 comments posted 20yrs
posted by richardkraal
3 comments posted 20yrs posted by richardkraal

Xyplex 1600 flash card help

I have one of these devices but I have no flash card with it I have a few 4meg flash cards from Cisco 1600 routers but...
0 comments posted 20yrs
posted by z400d3ZZZ
0 comments posted 20yrs posted by z400d3ZZZ

Xyplex double carriage returns when using tftp

I have a Xyplex 110 and a 1600 that I want to use as a terminal server for my Cisco study lab and have managed to get t...
1 comments posted 20yrs
posted by z400d3ZZZ
1 comments posted 20yrs posted by z400d3ZZZ