Cisco Systems

  1. Home
  2. Cisco Systems
14705 Threads Posts
to

Worth reading in Cisco Systems

Adding redundant Sup720 to 6509

Group, am the proud owner of a second Sup720 for our 6509. We bought it used and re-licensed it. I popped it in the spa...
3 comments posted 20yrs
posted by dempsey.bill
3 comments posted 20yrs posted by dempsey.bill

PIX and Nokia Communicator 9500/9300(i)

It seems that the only Cisco products that Nokia officially supports are the Cisco VPN 3000 Series Concentrators. Howev...
0 comments posted 20yrs
posted by korhojy
0 comments posted 20yrs posted by korhojy

Disabling CSA

While disabling CSA, the software prompts for the user to type in a text which is shown in a blurred fashion to the use...
2 comments posted 20yrs
posted by csudaya
2 comments posted 20yrs posted by csudaya

pptp connection

Hallo, I have probably a very simple question, but... I configured this pix 501 for remote pptp connection with local a...
0 comments posted 20yrs
posted by philippe_meskens
0 comments posted 20yrs posted by philippe_meskens

Help Pix 501 Newbie VPN

I have been struggling for 2 days to get this VPN working Have Pix 501 setup on local network with no server Want to co...
3 comments posted 20yrs
posted by zander21
3 comments posted 20yrs posted by zander21

input error - type overrun

Cisco states the following about input errors of the overrun variety: Description: The number of times the receiver har...
16 comments posted 20yrs
posted by nunyo.dambidness
16 comments posted 20yrs posted by nunyo.dambidness

Cisco 6509 at 240V?

Anyone know if its ok to run the 6509's 6000W power supplies at 240V instead of 208V? (Or 120V)? This ancient building...
5 comments posted 20yrs
posted by joey29034atyawwhodotcom
5 comments posted 20yrs posted by joey29034atyawwhodotcom

PIX 515 Inbound/Outbound access list confusion

I'm trying to setup my company firewall to allow connections that is described as: OUTSIDE IPs are: A and B These are N...
2 comments posted 20yrs
posted by vincehgov
2 comments posted 20yrs posted by vincehgov

fair-queue'ing

I have 10mbit metro ethernet from my ISP for the internet that goes into a FE interface on a Cisco 2691 router. Should...
1 comments posted 20yrs
posted by ask
1 comments posted 20yrs posted by ask

Do not fragment

What happens if a receiver gets a packet with DF set to 1 but can not process it? What will it notify the sender? Also c...
5 comments posted 20yrs
posted by san.kalyan
5 comments posted 20yrs posted by san.kalyan

Layer 3 routing with 3550

Hi All , will appriciate some feedback and help regarding this. Can this be done ,if yes how DLINK SWITCH(1) -- UPLINK...
3 comments posted 20yrs
posted by aman.chugh
3 comments posted 20yrs posted by aman.chugh

501 ACL issue

I cant seem to pull any snmp from a PIX 501 I hanve on my network. I can ping, SSH and get to the NAT'ed device. My wor...
0 comments posted 20yrs
posted by bygdoggy
0 comments posted 20yrs posted by bygdoggy

PIX 7.0(4) ACLs

Greetings All, We have a large acl list across multiple interfaces and we are wondering if there is an analyzer to chec...
0 comments posted 20yrs
posted by g_bash
0 comments posted 20yrs posted by g_bash