Cisco Systems

  1. Home
  2. Cisco Systems
14704 Threads Posts
to

Worth reading in Cisco Systems

Troubleshooting site-to-site VPN with two PIX 501s

I have a central office PIX 501 that currently runs independent site-to-site VPNs for around 5 remote offices, and I'm...
9 comments posted 20yrs
posted by chriswaltham
9 comments posted 20yrs posted by chriswaltham

PPTP VPN

Hi All I've the following scenario: Main office: SBS2003 with VPN PPTP server behind a Router Cisco 1841 with an IOS 12...
0 comments posted 20yrs
posted by ipop
0 comments posted 20yrs posted by ipop

PIX 506 (no e) VPN setup?

I am new to cisco configuration and am at loss for what to do/try. I have responsibility for a Cisco PIX 506 (no e) wit...
2 comments posted 20yrs
posted by mikee
2 comments posted 20yrs posted by mikee

PIX 515E ver. 7.1 ...no PPTP??

I was trying to configure a new PPTP configuration on our pix 515e and saw that cannot use vpdn commands...have them gon...
3 comments posted 20yrs
posted by xveral
3 comments posted 20yrs posted by xveral

Another Question on the 877W

How on earth do you enable 802.11b? My 802.11g devices can find the router just fine, but the 802.11b devices cannot. Wh...
11 comments posted 20yrs
posted by nordberg_73
11 comments posted 20yrs posted by nordberg_73

Need to Use SDM From Outiside Interface

How? I am using a Cisco 877W IOS v 12.4 and SDM v 2.3.1. If I run the firewall wizard, the option to "Allow secure SDM...
0 comments posted 20yrs
posted by nordberg_73
0 comments posted 20yrs posted by nordberg_73

basic vlan pix 6.3 question

hi, i've been playing around with vlans. i simply configured a vlan with an adress range, that's not i use yet. "interf...
3 comments posted 20yrs
posted by sillymartin
3 comments posted 20yrs posted by sillymartin

VLAN in the Cisco network

Hi, I want to know if I can build up another VLAN in the follow scenario: My company is using Cat4500 for the core swit...
7 comments posted 20yrs
posted by bensonlei
7 comments posted 20yrs posted by bensonlei

ASA 5510 Not routing remote vpn's to Internet

Hello, I've got a ASA 5510 that has 1 LAN, and Frame relay, and 1 internet connection. I have 3 remote offices that are...
0 comments posted 20yrs
posted by squidvt
0 comments posted 20yrs posted by squidvt

Adding site-to-site VPNs to existing PIXs -- PDM?

I've inherited a PIX 501 at a central office, which has site-to-site VPNs to around a half dozen remote offices. Now, I...
2 comments posted 20yrs
posted by chriswaltham
2 comments posted 20yrs posted by chriswaltham

PIX 515 - Cant get to Internet, but VPN works?

We had a Power outage and I guess I must have not saved a Config somewhere, either on the Edge Router or the PIX. When...
0 comments posted 20yrs
posted by scott-i
0 comments posted 20yrs posted by scott-i

ethernet frame loop

Hi following state. I have a switch with e.g. 48 userports and one uplink port. This switch is a carrier grade switch w...
3 comments posted 20yrs
posted by iwetzel
3 comments posted 20yrs posted by iwetzel

Pix 515 does not recover from, Power Failure

When we have a power failure our PIX 515 (see below for specs and versions) does not recover. When power is restored. i...
9 comments posted 20yrs
posted by scott-i
9 comments posted 20yrs posted by scott-i

DSLAM compatibility list

Hi all, i've heard 877 has some compatibility problems with some DSLAM and Cisco engineers are working on that. Does any...
0 comments posted 20yrs
posted by am
0 comments posted 20yrs posted by am

Cisco Aironet 1200 and ssid

Hi, I've a Cisco Aironet 1200. The configuration is good. I have 2 SSID, in 2 différents VLAN with an authentication by...
2 comments posted 20yrs
posted by nosp
2 comments posted 20yrs posted by nosp