Cisco Systems

  1. Home
  2. Cisco Systems
14704 Threads Posts
to

Worth reading in Cisco Systems

redist: bgp -> ripv2

[rtr1]____bgp____[rtr2]____ripv2____[rtr3] Don't seem to be able to get it going. Please, no lectures on why this may n...
1 comments posted 20yrs
posted by invalid
1 comments posted 20yrs posted by invalid

IPsec within L2TP over IPsec - PIX.

Cisco says PIX can terminate L2TP tunnels over IPsec from 7.2 and above. But, briefly, can it then manage an extra wrap...
0 comments posted 20yrs
posted by am
0 comments posted 20yrs posted by am

Please help me with this LAN Design

I work for a non-profit that was recently donated a Cat-6500 Sup1a with 3 48-10/100 mods. I am going to remove an old B...
1 comments posted 20yrs
posted by AHolmes40
1 comments posted 20yrs posted by AHolmes40

dhcp cisco806 basic setup question/problem...

I have a cisco 806 router. Two(2) ethernet ports on the router. Ethernet1 is connected to the internet, (receiving it's...
4 comments posted 20yrs
posted by captain99_1999
4 comments posted 20yrs posted by captain99_1999

No link with Cisco 828 and new dslam

Hi So our ISP upgraded some hardware and new dslam (probably some Siemens system) and now Cisco 828 is unable to establ...
7 comments posted 20yrs
posted by miika.nospam1
7 comments posted 20yrs posted by miika.nospam1

Loss of VPN Access Using Pix 501

Hello, My situation, I have a client who is using a Pix 501, 50 User license. Until a few days ago all worked fine........
3 comments posted 20yrs
posted by buck
3 comments posted 20yrs posted by buck

871 console port not working

I have a 871 router and trying to get the console to work. I tried pluggin in the blue Cisco console port cable into th...
3 comments posted 20yrs
posted by on.oahu
3 comments posted 20yrs posted by on.oahu

PIX-to-PIX IPSec VPN Tunnel

Hello All, We have recently inherited a network that has multiple locations with multiple tunnels over a few PIX units....
3 comments posted 20yrs
posted by aaron
3 comments posted 20yrs posted by aaron

Connecting to multiple different networks with BR350?

We have a Cisco BR350 on our research vessel, which we use to connect to another 350 on shore which is in access point...
2 comments posted 20yrs
posted by rock_spambust_violin
2 comments posted 20yrs posted by rock_spambust_violin

ios static nat issue

Hi all, can the following be accomplished: have a static nat translation of the form ip nat inside source static 10.x.x...
3 comments posted 20yrs
posted by frank
3 comments posted 20yrs posted by frank

end to end vpn cisco pix 501

Need a little help please. I am using the pdm on a pix 501 to setup/config an end to end vpn with another pix 501. I am...
1 comments posted 20yrs
posted by cdoc
1 comments posted 20yrs posted by cdoc

is it correct?

Hi. I have to configure a VPN between a network (1) with static public IP and a PC connected by ADSL with dynamic publi...
1 comments posted 20yrs
posted by msabba
1 comments posted 20yrs posted by msabba

Cisco Express 500 Series

Good morning all. I am still farily new to networking so please be gentle. I recently purchased a new Cisco Express 500...
5 comments posted 20yrs
posted by matthewsatkins
5 comments posted 20yrs posted by matthewsatkins