Cisco Systems

  1. Home
  2. Cisco Systems
14704 Threads Posts
to

Worth reading in Cisco Systems

SNMP OID for Bandwidth Usage

I am trying to monitor near-live bandwidth usage on a few PIX 501's and 515s with nagios. I found some plugins that wil...
2 comments posted 20yrs
posted by amattina
2 comments posted 20yrs posted by amattina

IP address assignment to the interfaces

If I have an interface , and a number sub interfaces.. how should my assignment of ip addresses to these sub interfaces...
1 comments posted 20yrs
posted by answers.stuff
1 comments posted 20yrs posted by answers.stuff

NAT location and VPN termination location

Hi, THis is how my network is currently set up. (for those of you who monitor this board often have probably seen it......
0 comments posted 20yrs
posted by Holleran.Kevin
0 comments posted 20yrs posted by Holleran.Kevin

Router for Fractional T3

Hope someone could point me in the right direction on purchasing the right router. We are upgrading to a Fractional T3...
2 comments posted 20yrs
posted by ZooOYork
2 comments posted 20yrs posted by ZooOYork

nat for pool

Hello I cant find solution for situation when i want to nat only adresses from 192.168.1.50 to 192.168.1.254 from insid...
1 comments posted 20yrs
posted by voytass
1 comments posted 20yrs posted by voytass

Cisco 2800 and VOiP gateway integration

Hello guys. I've got a Cisco 2800 series router acting as a PBX in our company. It's connected to the telco using trunk...
1 comments posted 20yrs
posted by mszary
1 comments posted 20yrs posted by mszary

Amount of flash simms in 3640

I have a 3640 with 16Mb Flash, Is it possible (without opening the router) to see if there is only one 16Mb flash simm...
2 comments posted 20yrs
posted by no.spam
2 comments posted 20yrs posted by no.spam

2801 two DSL multilink throughput problem..

I just installed a shiny new 2801 with two WIC1-ADSL's .. for a client that has TWO ADSL connects. (I'm in Canada, both...
0 comments posted 20yrs
posted by sdavis
0 comments posted 20yrs posted by sdavis

VPN Access through Pix 506E

Hi, I want to set up remote access to some test servers through a vpn on a Cisco Pix 506E. I don't want to add an authe...
1 comments posted 20yrs
posted by richardhopkins
1 comments posted 20yrs posted by richardhopkins

PPP IP Address negotiation

Using Cisco Secure ACS 4.0.1 and Cisco IOS Software 12.4(6)T in a large scale dial out setup. We are currently accessin...
0 comments posted 20yrs
posted by news
0 comments posted 20yrs posted by news

Multicast and query router or Switch

Hi All, The host send Membership_Add to the switch and the switch add the port used by the host on the multicast group....
0 comments posted 20yrs
posted by Rahan
0 comments posted 20yrs posted by Rahan

route-map for a 2600

I have a small 2600 (running IOS 12.2(15)T14), 2 ethernet interfaces, (not Fastethernet) and 2 serial (only one used)....
0 comments posted 20yrs
posted by tomarseneault
0 comments posted 20yrs posted by tomarseneault