Cisco Systems

  1. Home
  2. Cisco Systems
14701 Threads Posts
to

Worth reading in Cisco Systems

PIX 515 Software Upgrade

I have a customer that wants to upgrade their PIX 515. They already have upgraded the onboard memory but not sure why s...
1 comments posted 20yrs
posted by nospam
1 comments posted 20yrs posted by nospam

is a used PIX 501 from 2002 useful for study ?

Have the option to buy a used PIX 501 circa 2002. Was told it had IOS 6.3 on it. Two questions: Was 6.3 out in 2002 ? I...
3 comments posted 20yrs
posted by support
3 comments posted 20yrs posted by support

NM-4T line protocol

going up and down all the time. You would suspect cabling, but a 2621XM with a WIC-1T connected to the same cable works...
0 comments posted 20yrs
posted by danick.veenstra
0 comments posted 20yrs posted by danick.veenstra

3750 no image

Somehow on rebooting a 3750 it seems to have lost it's image. It is part of a 3 3750 switch stack. There is one master...
6 comments posted 20yrs
posted by _bill_
6 comments posted 20yrs posted by _bill_

Can a 2610 handle this?

Hello All, I have a main site that handles connections to 13 branch sites via T1 frame relay connections, and a upcomin...
2 comments posted 20yrs
posted by DomT87
2 comments posted 20yrs posted by DomT87

Outbound Dial Peer for URI Destinations

Hello I need to write a tcl script to convert (transfer) a call to a SIP URI, so my outbound dial-peer transfer the req...
0 comments posted 20yrs
posted by fernando.donate
0 comments posted 20yrs posted by fernando.donate

Removing line from PIX config

I have a line in the configuration of my PIX 506e that is no longer needed. I know for my ACLs, if I want to remove a l...
6 comments posted 20yrs
posted by chrismtoth
6 comments posted 20yrs posted by chrismtoth

Dynamic to Static PIX to PIX VPN

So this continues...I found that I can configure a DHCP public PIX with a PIX that has a static address so I setup the...
2 comments posted 20yrs
posted by amattina
2 comments posted 20yrs posted by amattina

Reprogramming SEEPROM

Does anyone know about a possiblity to reprogram a Supervisor's SEEPROM, especially Catalyst 4500 Supervisor Engine IV?...
0 comments posted 20yrs
posted by martin.turba
0 comments posted 20yrs posted by martin.turba

Setting up a SysLog server for PIX

I need to setup a syslog server for a PIX. Is it as easy as setting up a Linux box with syslog and adding it's IP addre...
3 comments posted 20yrs
posted by chrismtoth
3 comments posted 20yrs posted by chrismtoth

2 ISPs and 1 2620

Hello My ISP is in transition of changing its ISP My question is can i have 2 routers on 1 router? for example (do not...
2 comments posted 20yrs
posted by mor_feusz
2 comments posted 20yrs posted by mor_feusz

SLB problems with IOS 12.4.10 on 3640

Hi All, I am load-balancing a web HTTP server (Apache) with a Cisco 3640 and SLB. Up to release 12.4.8a(LD) it was OK (...
0 comments posted 20yrs
posted by haydude
0 comments posted 20yrs posted by haydude

Cisco VPN Client causes sound problems

I have strange problem with Cisco VPN Client and Windows SP2. When connection to VPN concentrator is enabled I hear noi...
1 comments posted 20yrs
posted by jarmal76
1 comments posted 20yrs posted by jarmal76

bridging over ISDN

Apart from the standard bridge commands, issue a ping to bring up the link and setting the dialer idle-timeout to the ma...
0 comments posted 20yrs
posted by mr.fixit.dave
0 comments posted 20yrs posted by mr.fixit.dave