2 ISPs and 1 2620

Hello My ISP is in transition of changing its ISP

My question is can i have 2 routers on 1 router?

for example (do not care about IP addressess - some not real) Current status (all IP public): Default Gateway 40.40.66.1 WAN: 40.40.46.239 LAN:40.40.56.112/28

in near future they will give me new IP addressess for example Default Gateway 50.50.66.1 WAN: 50.50.46.239 LAN:50.50.56.112/28

Can I setup router to route 1 network and anpther how can i do this

I have 1 isco 2620 and 2 x FE interface

Will it work?

int FE0/0 no ip address int FE0/0.1 ip address 40.40.46.239 mmm.mmm.mmm.mmm int FE0/0.2 ip address 50.50.56.239 xxx.xxx.xxx.xxx int FE1/0 no ip address int FE1/0.1 ip address 40.40.56.112 mmm.mmm.mmm.mmm int FE1/0.2 ip address 50.50.56.112 xxx.xxx.xxx.xxx

and than what should be the routing entry?

ip route 40.40.56.112 40.40.66.1 ip route 50.50.56.112 50.50.66.1

Reply to
Robert
Loading thread data ...

Reply to
snwbrdrjeff

There are ni WIC card This connection is Fa connection RJ45

------RJ45-Fa0/0--2620-Fa1/0--RJ45---Firewall-----

Reply to
Robert

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.