Hi, This was also posted in the other grp...I'm pasting it here as time is short :( Read from top to bottom...
Voitec wrote:
>
> > Hi,
> >
> > Tried (in vain) to find out whether 802.1q can be set up over the
> > Ethernet modules or will it only run over the FastEthernet ones? >
>
> 2610's with IP Plus and 12.x (search google) can do dot1q over Ethernet > ports.
>
> --
>
> hsb
>
>
> "Somehow I imagined this experience would be more rewarding" Calvin
> **************************ROT13 MY ADDRESS*************************
> Due to the volume of email that I receive, I may not not be able to
> reply to emails sent to my account. Please post a followup instead.
> ********************************************************************
HSB, Thanks for the quick reply. I know that the 2610s do it as of 12.2(2)T and was wondering about the 4000 series as well.
That's because FastEthernet does not seem to be supported on the 4000s (only on the 4500s and 4700s) yet they seem to have 802.1Q support as per::
formatting link
So it has to run over the Ethernet interfaces then. Wouldn't you say?
I'm after a few 4500s and if I can do without the NP-1FE modules ($100-$150 each) then I'll be very happy.
Thnx, V