Gang, I'm looking at a 6509 for a friend. It's ios looks like it has been deleted. It won't go any further than rommon.
from the filename it says "deleted". I'm guessing that deleted it but didn't "squeeze" to purge it.
At this point am I hosed? Xmodem install of IOS? Or is there a way to use the "deleted" file.
I've tried boot=bootflash: sync boot but it gives me a magic number error.
Thanks for any help
Kilgore.
see if there is an undelete command avaialble in rommon mode; there is once IOS is up
otherwise check for tftpdnld command and down load image froma aTFTP server
The rommon doesn';t support undelete or TFTP. I'm trying to xmodem now, but xmodem with hyperterm keeps bombing out. Hypterterm has told me "Unrequested Response". I've tried with other terminals and no such luck. ANy ideas?
Was the 6509 running native or hybrid ?
What Supervisor ?
It's a 720 MSFC3 in Native mode.
There is no console recovery for a deleted/corrupt image on a Sup720. If you can get the IOS image on a CF card you can boot from that, otherwise you will need a replacement Supe.
-DW
troute snipped-for-privacy@yahoo.com wrote:
You will need to get IOS on a CF card that has been formatted by another Sup720.
David West wrote:
Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.