1. Home
  2. CCTV, Alarms and other Physical Security
  3. DCS 832 & LCD5501Z zones

DCS 832 & LCD5501Z zones

This may be a dumb question but how do you program a zone off a keypad? The manual says to *8(installers code) 020 then zone numbers coresponding to the slot position of the keypad. When I do this the LCD5501Z displays attribut numbers but the additional zones will not program?? I am using 8 zones off of the panal and am trying to assign zone 9 ans 10 to two of the 4 keypads I have

Thanks

Reply to
Max
Loading thread data ...

You need to know the keypad address, 1 thru 8. Assuming your keypads are addressed 1 thru 4, and you want to program zone 9 on keypad 1, and zone 10 on keypad 2:

*8 020 09 10 ##
Reply to
alarman

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.