We are trying to avoid dialing 9 to get us external on a few analog sets on our M1 61C Succession 4.5.
Anyone have any tips as to how to do that?
Thx again,
John
We are trying to avoid dialing 9 to get us external on a few analog sets on our M1 61C Succession 4.5.
Anyone have any tips as to how to do that?
Thx again,
John
Besides avoiding the dial 9, do you want them to be able to dial any phone number? Do they still need to be able to dial internal stations?
Its actually for an out going modem bank that hangs off a server. The DN's will only be dialling external numbers.
The issue we have is the application that does the calling only allows you to set a global 9 or no 9. We use 2 different modem cards in that server. 1 has 8 ports feed from 8 analog lines from our 61c and the other has a T1 feed directly to the modem card and does not go through our PBX.
Thx again for any tips...
John
Here's one way - from the GHTROUT web site:
Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.