36 discussions on Cabling-Design.com Forums about the Linksys WET54G: what owners asked, what went wrong, and what fixed it.
Will the Netgear WGPS606 communicate wirelessly with the Netgear WGT624?And just to be sure I'm not forgetting to ask a question I perhaps needto ask (though I think if the above is YES, these should be as well,but I have learned with...
Linksys's Support personnel struck out on this, but here goes:I have a Linksys wireless router, model no. WRT54GS, v.7.I have a desktop, a laptop, and a printer connected to the routervia cat 5 cables running10Mb Ethernet. The router also...
Hi,I need to connect a xbox (original) to a wireless network, the official xbox 1 wireless adapter is quite hard to come by so I am thinking about an ethernet wireless bridge.Does anyone have any experience with these ?, reccomendations...
Are the MAC addresses of most wifi radios changeable?Which address of which is used in authentication when connecting to anAP? User x buys a radio to connect to local AP. If Admin Y does not likeuser x net activities, even if legal, he...
I have just obtained a Sonicwall TZ-150 wireless appliance and aNetgear EVA700 media player. The latter is a box that takes input froman RJ-45 cable or 802.11g radio waves, and outputs audio and video(analog) to a TV.These two devices are...
Is there not a wireless-ethernet bridge ("gaming adapter") that supports WPA-PSK (AES) ?I've bought two from a local store only to return them because they don't do AES. I told them I would keep purchasing and returning until the...