29 discussions on Cabling-Design.com Forums about the Cisco C1700: what owners asked, what went wrong, and what fixed it.
Sorry in advance for being verbose... Hopefully it helps you answerthe question, though.I was given a Cisco 1720 with no WICs. It has a built in ethernetport, console port, and aux port (some type of serial interface?).My buddy couldn't...
Frame relay traffic shaping and QoS appears to be incompatible withframe relay end-to-end keepalives. Need traffic shaping to provideproduction traffic with guaranteed bandwidth in the presence of othertraffic. Need end-to-end keepalives...
Hello:Hope some one has an answer to this or can direct me in the right direction.We lost our 1720 router a few weeks back (memory problems) and I replaced itwith a cisco 1721. I utilize a single WIC-1ENET card in WIC slot 0 for myWAN...
I'm trying to work out why enabling CEF on our 1712 causes webbrowsing to stop. I want to enable CEF so I can prioritise SIP andother traffic on our WAN connection and from google I understand thatcef is the first step towards doing this....
I have a 1720 with 32/8mb running IOS I want to use a WIC-1ENET card, but I keep getting the following error!00:00:04: %PQUICC-1-UNKNOWN_WIC: PQUICC(0), WIC card has an unknown ID of 0x39Cisco Internetwork Operating System Software IOS (tm)...
This is a wierd one... I have a Cisco 1720 and I cannot pass trafficover the serial interface (T1 WIC) while logged on to the router.#ping Translating ""...domain server (192.168.1.254) [OK]Type escape sequence to abort.Sending 5, 100-byte...