16 discussions on Cabling-Design.com Forums about the Cisco 2610XM: what owners asked, what went wrong, and what fixed it.
Hi,i have a cisco router :Model Cisco 2610XMIOS = c2600-IPBASE-MVersion 12.3(6e)This router use a controller E1 (Channalized E1 Version 1.0).i need to use this commande on controlleur E1 :clock source line primaryBut the router not...
Hi,i have a cisco router :Model Cisco 2610XMIOS = c2600-IPBASE-MVersion 12.3(6e)This router use a controller E1 (Channalized E1 Version 1.0).i need to use this commande on controlleur E1 :clock source line primaryBut the router not...
HelloI have this scenario:R1 with DSL lineR2 with DSL lineTwo HSRP Groups in both routers.group 1: virtual IP 172.16.0.1group 3: virtual IP 172.16.0.3Each router has two tracking systems,a) tracks ATM0b) tracks icmp ping to a remote host...
I have the Following Access list setup for one of our Offices.Its on a Cisco 2610XM that has T1's to the internet.The list is applied to the MFR0 interfaceI'm wondering if I should Have the Router Filter out this stuff, or pass it along to...
is there a legit way I can get hold of Callmanager Express 4.1 or earlier? I've been told this is what I need for a 2600 router.I've tried some resellers, they say discontinued, no can do. Thanks for any advice.
Both of my routers 2610 and 2610XM can not see a NM-1E-2W.What's wrong?Is that because of the IOS are too old?If that's the case, where can I download newer ones?Thanks,ZPDetails are below:2610XM:Copyright (c) 1986-2002 by cisco Systems,...