2600 router and CNA 4.0

I've added a 2600 series router to a community of two 2950G switches in Network Assistant 4.0 and the router is being displayed as an unsupported device. The router is running 12.3 IOS, has no ACLs defined, is running ip http server and CDP and I can telnet and browse to it from the PC running CNA.

It's shown in the community as a 2621, so presumably CNA read this from CDP.

Anyone know if anything needs to be defined on the router to allow management from CNA ?

Reply to
John S.
Loading thread data ...

To answer my own question, when Cisco state a rather sweeping "2600 series", they actually mean "Cisco 2600 series, models 2610XM, 2611XM,

2620XM, 2621XM, 2650XM, 2651, 2651XM, and 2691". So, nothing as old and boring as a 2621 :-(
Reply to
John S.

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.