Cisco Systems

  1. Home
  2. Cisco Systems
14701 Threads Posts
to

Multiple connections to single AS2511-RJ tty port

At my previous job we used Digi terminal servers. These terminal servers allowed multiple connections to the same TTY p...
3 comments posted 17yrs
posted by bbeacham
3 comments posted 17yrs posted by bbeacham

redirect dns on ASA 5505 to my ISP

Hi, I have a LAN with static configured IP telephones. All the telephones are configured in this way: IP: 192.168.2.101...
5 comments posted 17yrs
posted by email
5 comments posted 17yrs posted by email

Source IP address

When my router A routes locally generated icmp packets (local PBR) it always puts ip address of it's interface fa1 as t...
3 comments posted 17yrs
posted by igor.mamuzicMAKNI_TO
3 comments posted 17yrs posted by igor.mamuzicMAKNI_TO

SHDSL routers back-to-back

I'm trying to connect two SHDSL routers, a Cisco 828 (IOS 12.3(6e)) and a ZyXEL Prestige 791R. I have very limited expe...
1 comments posted 17yrs
posted by kristian.rasmussen
1 comments posted 17yrs posted by kristian.rasmussen

config router as vpn client

I've got two routers, both are 2651XM's and both loaded with IOS C2600-ADVENTERPRISEK9-M, Version 12.4(2)T . One is con...
0 comments posted 17yrs
posted by tg
0 comments posted 17yrs posted by tg

Help with IGMP Accounting~

Hi guys, If I want to record all IGMP Join and Leave Events of some certain multicast groups within a campus network, wh...
0 comments posted 17yrs
posted by dlyyang
0 comments posted 17yrs posted by dlyyang

Cisco 1841 Unable to boot with CF inserted

I have 2 different 1841 routers that are unable to boot when the CF card is inserted. Both routers hang after this outp...
4 comments posted 17yrs
posted by ihopeipass
4 comments posted 17yrs posted by ihopeipass

Lynksys (CISCO) - WRT160N

Hi guys, I have recently purchased a Lynksys WRT160N and would like to have command line access to it, I have been seac...
2 comments posted 17yrs
posted by azzmosphere
2 comments posted 17yrs posted by azzmosphere

E1 from SDH MUX

Hello group, Pleae I have an E1 link from an Onsite MUX. If I plug it into a Linksys SRW224p - EU, will it work as a nor...
1 comments posted 17yrs
posted by olalekanva
1 comments posted 17yrs posted by olalekanva

ASA 5510 Failover License

I have 2 ASA 5510's that appear to need new licenses to enable failover. Can anyone confirm its ASA5510-SEC-PL ? And wh...
1 comments posted 17yrs
posted by jzakhar
1 comments posted 17yrs posted by jzakhar

ezvpn with network extension mode question

I have a remote office connected to my main network using ezvpn in network extension mode. The remote site is using a 2...
0 comments posted 17yrs
posted by jj33
0 comments posted 17yrs posted by jj33

Isdn error Cause i = 0x8792 - No user responding

Helo, I have a probleme with an interconnexion between two routeurs with isdn BRI interfaces (Cisco 2600 and a Cisco 17...
4 comments posted 17yrs
posted by analyne
4 comments posted 17yrs posted by analyne

ASA ssh login privilege level not set correctly

When I log in via ssh to an ASA configured with aaa authentication ssh console LOCAL aaa authorization command LOCAL us...
0 comments posted 17yrs
posted by ts-usenet0811
0 comments posted 17yrs posted by ts-usenet0811

how route data and calls over Hwic 3G GSM

hi all we suffering problem, we purchased router 2800 voice bundled also it includes Hwic 3G GSM modem, what I know tha...
0 comments posted 17yrs
posted by Cisco.ahmed
0 comments posted 17yrs posted by Cisco.ahmed