Cisco Systems

  1. Home
  2. Cisco Systems
14701 Threads Posts
to

VLAN tunneling through access link

Hello, Situation is as follows; I have access link, it's not possible to convert it to trunk and terminal equipment is...
1 comments posted 17yrs
posted by fe
1 comments posted 17yrs posted by fe

Cisco 1600 Series Visio Stencil

Hi, Does anybody have a Visio Stencil for the Cisco 1600 series. I have checked the Cisco site and have everything else...
0 comments posted 17yrs
posted by thedysk
0 comments posted 17yrs posted by thedysk

Cisco QoS

I am wanting to enable QoS on my cisco 3620 router for my VoiP traffic. I know this can be done using ACL's instead of S...
1 comments posted 17yrs
posted by jonathan.carpenter
1 comments posted 17yrs posted by jonathan.carpenter

tcpdump filters for data collection

I want to collect data on a network and map the data flow and system/port traffic. There are 2 scenarios of data collec...
3 comments posted 17yrs
posted by castellan2004-nschap
3 comments posted 17yrs posted by castellan2004-nschap

Machine Authentication

Hi, all I am desigen soultion for remote access vpn, I need to authenticate the client, also need to authenticate its ma...
3 comments posted 17yrs
posted by Cisco.ahmed
3 comments posted 17yrs posted by Cisco.ahmed

CCIE Lab Books recomendations?

I'm trying to find a good book(s) for the CCIE Routing & Switching Lab. I've found several books on the subject (I own...
3 comments posted 17yrs
posted by ttripp
3 comments posted 17yrs posted by ttripp

mib for access-list count

Is there any MIB to get the access-list hit count in cisco routers/PIX/ ASA
0 comments posted 17yrs
posted by uthayaman
0 comments posted 17yrs posted by uthayaman

Framerelay Traffic Shaping

hi, In FRTS can I relate PIR with Access Rate (AR) .Are they same ? Thanks in Advance...
0 comments posted 17yrs
posted by vickusr007
0 comments posted 17yrs posted by vickusr007

InterVLAN and Static NAT

I have configured two clients on a Cisco 1841 router and Cisco Catalyst 2960 Switch using InterVLAN and static NAT. The...
1 comments posted 17yrs
posted by ayanda.madyibi
1 comments posted 17yrs posted by ayanda.madyibi

Cisco + Ericsson Mini-Link 34 Mbps

Hello, I'm dealing with a problem on a 34 Mbps RF link. | cisco 2821 ipbase 124-5a.bin | -- coax cable ------------ | E...
4 comments posted 17yrs
posted by enrico.emilio
4 comments posted 17yrs posted by enrico.emilio

vpn client devices

I have a 2651XM router configured as a vpn server. At the moment I know that another cisco 2600 router (configured as a...
0 comments posted 17yrs
posted by tg
0 comments posted 17yrs posted by tg

ACL entry allowing tracert and traceroute

Hi all, I have a switch with multiple VLANs on it. Each VLAN has a corresponding ACL ending with the following line: de...
8 comments posted 17yrs
posted by aleu
8 comments posted 17yrs posted by aleu

[Cisco 857W] ADSL interface attenuation

Hi all, I have at home a Cisco 857W router connected to an ADSL line. Very briefly, I need this equipment because I use...
7 comments posted 17yrs
posted by elipsia2001
7 comments posted 17yrs posted by elipsia2001

converting cisco sip phone to sccp

cisco 7940G ip phone regarding cisco document: http://www.cisco.com/application/pdf/paws/5455/handset_to_sip.pdfConvert...
0 comments posted 17yrs
posted by tg
0 comments posted 17yrs posted by tg

Priority queueing and bridging

Hi, I've got two 2610 cisco routeur which are configured as bridge and I would like to use "Priority queueing". I tried...
2 comments posted 17yrs
posted by nospam
2 comments posted 17yrs posted by nospam