I work for a non-profit that was recently donated a Cat-6500 Sup1a with
3 48-10/100 mods. I am going to remove an old Baystack 10baset LAN and I would like to bring in the 6500 as the core. My problem is this. I have 6 remote offices (same campus connected by fiber ..less than 500m). Each one of these offices has an 8 port 10baset with a ST-AUI adapter... the other end takes each building to an old baystack ST
10baseT concentrator... I would like to purchase the WS-x6408-gbic to replace the old concentrator but Im not sure what the most economical route to take at the remote buildings since there are only two offices per building.can someone recommend the other end of the WS-6408-GBIC? ... I was planning to use the SFP if they make an ST-SFP adapter ,,,
Thanks so much
Andrew Holmes Star of Hope Mission