Cisco Systems

Gigabit adapters in HP Proliant Server running Windows 2003

We have an 6513 Cisco router and we have some HP Proliant servers running Windows 2003 with gigabit adapters. Ports are...

11 comments posted 18yrs

posted by the.sabos

11 comments posted 18yrs posted by the.sabos

RANCID + PIX

Rancid is working nicely downloading my switch, router and PIX configs. Checking in today to load up a backup firewall...

2 comments posted 18yrs

posted by amattina

2 comments posted 18yrs posted by amattina

How To Build Own Console Cable

Went down to the local electronics store and bought a ribbon cable and an RJ-45F to DB9F adapter. But now that I'm look...

2 comments posted 18yrs

posted by JohnD

2 comments posted 18yrs posted by JohnD

PIX advise needed

I am able to VPN into my PIX from the Internet - I get an address from the local pool. But when I try to PING anything...

4 comments posted 18yrs

posted by nedtrilby

4 comments posted 18yrs posted by nedtrilby

NAT loopback - sort of

Hi, I have a Cisco 1841 connected to a DSL circuit and two LANs. Fa0/0 is 192.168.101.0/24 Fa0/1 is 172.28.110.0/24 Dia...

0 comments posted 18yrs

posted by troffasky

0 comments posted 18yrs posted by troffasky

MQC based QOS and locally generated packets

Hi, I have am converting a number of our sites from priority queue based QOS to MQC based QOS. Previously we were marki...

2 comments posted 18yrs

posted by anon6111

2 comments posted 18yrs posted by anon6111

2600 router + 2924 switch and vlans

switch config: interface FastEthernet0/14 ! interface FastEthernet0/15 ! interface FastEthernet0/16 switchport mode tru...

8 comments posted 18yrs

posted by jzakhar

8 comments posted 18yrs posted by jzakhar

Cisco VPN Client (MSI, EXE) Installer

All, I am trying to deploy the Cisco 5.0 VPN Client to several remote users. I want to re-package the installer into a...

3 comments posted 18yrs

posted by jwible

3 comments posted 18yrs posted by jwible

Access Console on an ASA using USB or Ethernet?

Is it possible to access the console of the ASA using a USB cable or Ethernet? Do I require a special cable? I have a l...

4 comments posted 18yrs

posted by chris.crowder

4 comments posted 18yrs posted by chris.crowder

ACLs in PIX 7 and above

Hi there ! In 6.3 it was possible to remove an entire ACL with "no acl ". This no longer works in PIX 7 - one has to re...

5 comments posted 18yrs

posted by frank-usenet

5 comments posted 18yrs posted by frank-usenet

FWSM in front of MSFC

Hellow, I am trying to setup a FWSM on a Cat.6500 running IOS. I would like to put the MSFC behind the firewall, and us...

2 comments posted 18yrs

posted by info

2 comments posted 18yrs posted by info

Can someone double check the config

Hello, Below are the configurations from 2 routers that are connected via point to point T1 line. Please note hollywood...

3 comments posted 18yrs

posted by sales

3 comments posted 18yrs posted by sales

Cisco 2924 switch

To all Cisco users: I am trying to configure VLANs on this (rather old) Cisco 2924 switch (actual model under 'show ver...

5 comments posted 18yrs

posted by bavien

5 comments posted 18yrs posted by bavien

Limiting bandwidth per user on the 1800 Series

We're considering an 1811 to replace our SonicWALL. One requirement is to prevent LAN users from hogging bandwidth. Let...

9 comments posted 18yrs

posted by nate.silva

9 comments posted 18yrs posted by nate.silva

Virtual ethernet interface

i've noticed that my new 2960 switches have 1 virtual ethernet interface. anyone can explain (or post link) what this is...

8 comments posted 18yrs

posted by ugarb2001

8 comments posted 18yrs posted by ugarb2001