Cisco Systems

connect lynksys rvl200 to cisco concentrator in IPSEC ?

Hi i want connect a Linksys RVL200 to a cisco concentrator (3005) in ipsec but i have a problems, the phase 2 don't sta...

0 comments posted 18yrs

posted by mag

0 comments posted 18yrs posted by mag

ASA5510 - VPN Client loses Gateway address after couple of minutes

We have set up a ASA 5510 for remote VPN access. It works and when a client connects he gets an address like 10.11.11.2...

0 comments posted 18yrs

posted by notimportant

0 comments posted 18yrs posted by notimportant

ASA 5510 Loopback configuration

Not sure if loopback is right term but here's the scenario: Small Business with a 5510. External domain name is domain....

6 comments posted 18yrs

posted by chimp98

6 comments posted 18yrs posted by chimp98

video conferencing using Cisco 1811 and Polycom video conference

Hi, I can make out bound calls using my video conference unit a Polycom Viewstation but I can not recieve calls. My rou...

0 comments posted 18yrs

posted by james.winskill

0 comments posted 18yrs posted by james.winskill

Suggestion and recommendation please

Hi folks, I have post somes messages regarding the PPPoE protocol forwarding. Thanks to Merv to help me in the understa...

0 comments posted 18yrs

posted by marleduc

0 comments posted 18yrs posted by marleduc

Secondary Number to CUE Problem

I'm trying to set up a CME 4.0 / CUE 3.0installation for direct inward dialing by using the secondary number on their e...

0 comments posted 18yrs

posted by leeml

0 comments posted 18yrs posted by leeml

Configuring dhcp on cisco 3750

I've been trying to configure a simple dhcp setup with the following topology: Cisco3750[Port:1] dhcp server 192.168.2....

11 comments posted 18yrs

posted by asif.haswarey

11 comments posted 18yrs posted by asif.haswarey

Cisco 2811 with HWIC-4ESW

I have a Cisco 2811 running IOS adventerprisek9-mz.12.4-15.T and a HWIC-4ESW installed. Does anyone have the foggiest i...

3 comments posted 18yrs

posted by drstigall

3 comments posted 18yrs posted by drstigall

BSCI.

Hi, I'd like to learn for BSCI exam and I found two books from ciscopress: a) Building Scalable Cisco Internetworks (BS...

0 comments posted 18yrs

posted by hubert_w76

0 comments posted 18yrs posted by hubert_w76

MIB Discovery Failure

Running a Cisco 3845 with 12.4(9)T1 The following command: sho snmp mib ifmib ifindex Tunnel160123 yields the following...

0 comments posted 18yrs

posted by masferfc

0 comments posted 18yrs posted by masferfc

Determining device type via SNMP

I have a list of devices. I need to specifically determine which are Cisco 5xxx/55xx CAT switches. What SNMP get command...

1 comments posted 18yrs

posted by marco.shaw

1 comments posted 18yrs posted by marco.shaw

Switch 3750 - Interface VLAN counters

Hello all, I use MRTG to poll (SNMP) my cisco switches and to graph in/out bandwidth for some specific ports. I would l...

1 comments posted 18yrs

posted by anonipub

1 comments posted 18yrs posted by anonipub

2924 + vlans

I have 2 2924's with the WS-X2924-XL-V expansion port in each. I have the trunks between switches set up via port group...

14 comments posted 18yrs

posted by jzakhar

14 comments posted 18yrs posted by jzakhar

Xmit-Err and Rcv-Err via SNMP?

You guys happen to know of any good online resources? I'm trying to find out if I can get errors on older CATs via SNMP...

3 comments posted 18yrs

posted by marco.shaw

3 comments posted 18yrs posted by marco.shaw

Fire the web morons!

OK, today's "new and improved" Cisco website is about the worst piece of excrement I've seen yet. When I'm in a hurry t...

2 comments posted 18yrs

posted by mrdorn

2 comments posted 18yrs posted by mrdorn