Cisco Systems

  1. Home
  2. Cisco Systems
14701 Threads Posts
to

3750 Routing

Hi all; I'm jack of all trades, master of none for my organization so this is a basic question. I've been out to cisco....
1 comments posted 18yrs
posted by tesseeb
1 comments posted 18yrs posted by tesseeb

ISDN Up But No Ping Response

Can anyone help with some ISDN advice. I have a router with a remote ISDN connection. The router is able to successfull...
12 comments posted 18yrs
posted by darrenfgreen
12 comments posted 18yrs posted by darrenfgreen

PPPoE

I'm looking to establish a PPPoE virtual template on a 7206 vxr that supports ipv6 and ipv6 prevfix delegation. has any...
1 comments posted 18yrs
posted by mikeh
1 comments posted 18yrs posted by mikeh

cisco 876 as bridge

i have a star topology corp vpn network over internet consisting of main location with cisco-1751 connected to other br...
1 comments posted 18yrs
posted by sali
1 comments posted 18yrs posted by sali

Configuring ASA 8.0.3 ssl vpn for Exchange

I have a vpn set up for anyconnect webvpn access. I need to set it up such that users can use the Outlook client on the...
3 comments posted 18yrs
posted by starnat
3 comments posted 18yrs posted by starnat

Catalyst 1900 Configuration {lost} sorry

Hi, I am hoping someone nice and informed can help me. I am not an expert with this, but know enough to motivate me to...
12 comments posted 18yrs
posted by the.srh
12 comments posted 18yrs posted by the.srh

Internet T1 setup question

I need to get an internet T1 working temporarily on a Cisco 1721 with a WIC 1 DSUCSU card. This router is already in us...
0 comments posted 18yrs
posted by chris_fricke
0 comments posted 18yrs posted by chris_fricke

Cisco 876w performance

Hello, i setup an cisco 876w on ADSL2+ over ISDN line, but the perfofrmance is somewhat bad in comparison to a "low-end...
3 comments posted 18yrs
posted by adrock0801
3 comments posted 18yrs posted by adrock0801

default non-ip traffic handling on 3750

I am sending non ip traffic through a 3750. The 3750 is in default configuration. Some of the frames are being dropped...
0 comments posted 18yrs
posted by adrian.uliana
0 comments posted 18yrs posted by adrian.uliana

802.1x with ACS and Third Party Switch

I want do use the Cisco ACS for 802.1x authentication with a Third Party Switch (Alcatel). With a Cisco switch everythi...
0 comments posted 18yrs
posted by no
0 comments posted 18yrs posted by no

PIX 501 6.3

Hello, I am not sure where I am going wrong here, but when I add the following 4 lines to my configuration, I loose the...
2 comments posted 18yrs
posted by nobody
2 comments posted 18yrs posted by nobody

Cisco 878

Hi all I'm having trouble with an 878 SHDSL modem My startup config for the controller is controller DSL 0 mode atm lin...
3 comments posted 18yrs
posted by np121
3 comments posted 18yrs posted by np121

HW & SW VPN client -- need routing workaround

We have a 3005 concentrator with 3002s at three branches of a clinic. Their local subnets are 192.168.0.0, 192.168.1.0...
3 comments posted 18yrs
posted by bob
3 comments posted 18yrs posted by bob

Pix as router?

I have a pix (well several) and just want a router (just one) for a private link. Pix is plenty man enough for the job...
4 comments posted 18yrs
posted by Bod43
4 comments posted 18yrs posted by Bod43